Tech Tip: Preventing ABS Sensor Failure in Pigtail-Style Hub Assemblies
In this technical bulletin, SKF provides updated technical information for preventing ABS sensor failure in pigtail-style hub assemblies. ABS system failures that happen shortly after hub unit installation can cause concern and customer dissatisfaction. Several items should be checked during the replacement process to prevent additional unnecessary repairs.
Fully Contain Spills with Brady’s Eco-Friendly Granular Absorbents
Brady has expanded its SPC absorbent product line to include the new Re-Form Granular absorbents. This environmentally responsible absorbent is made from 100% recycled post consumer paper waste and absorbs oils, solvents, lubricants, coolants, water and most non-aggressive liquids on contact.
TECH TIP: NISSAN: ABS SELF-CHECK NOISE
Each time the ignition is turned on and the vehicle is driven at about 16 mph, the ABS/VDC system performs a “Self-Check” to confirm components of the ABS/VDC system are operating correctly.
TECH TIP: GM: ABS Lamp ON/DTC C0040 Set
Some customers may comment that the ABS light is illuminated. This may be caused by the wiring harness coming in contact with the A/C compressor pulley.
Take the Guesswork Out of Engine, ABS and SRS Repairs with the New OTC 9450
When a diagnostic scan is required or to determine the cause of the check engine light, brake warning light or airbag (SRS) light, the new Bilingual OBD II Scan Tool, ABS and SRS Code Reader from OTC gets the job done right the first time. It offers technicians and collision shop owners with comprehensive, professional code coverage-allowing them to read LIVE data and review freeze frame data to help pinpoint the problem components for a fast diagnosis.
Luber-Finer Air Filters from Champion Labs
Luber-finer air filters possess the ability to remove 99% of airborne contaminants, thereby providing unparalleled engine protection, says the company. Luber-finer air filters are constructed with specially blended filter media that enables the filter to hold 25% to 30% more dirt, even in the most extreme operating environments. Available in a broad range of sizes
Tech Tip: Audi ABS Activates Upon Light Braking
ABS activates when braking lightly or control noises are heard from the ABS unit at low speed without brake application. This may be caused if an ABS control takes place without the flashing of the ESP lamp and, therefore, without ESP operation.
Wheel Speed Sensors: ABS and TCS Signal Use
The signals from the Wheel Speed Sensors (WSS) are the most important sensor input to the Brake Control Module (BCM) for ABS activation.
OTC Introduces Trilingual OBDII, CAN & ABS Scan Tool
New cutting-edge mid-level scan tool delivers LIVE data in English, Spanigh and French, and access to more than three million verified fixes for trouble codes that cause the check engine light to illuminate.
Tech Tip: Mazda ABS Warning Light On and Grinding Noise from Front Wheels
If a customer brings in a Mazda with an ABS warning light and a grinding noise from the front wheels, it could be due to problems with the sensor rotor or with the front brake disc, depending on the model.