Hastings Upgrades Tough Guy Racing Rings
Hastings Manufacturing Company, LLC, a nearly 100-year-old maker of piston rings, has improved their Tough Guy Premium Ductile series to include Napier premium ductile iron 2nd rings.
Tech Update: Gaskets, Seals, Sealants and Fasteners
Some gaskets can go the distance, while others can not. The factors that typically cause a gasket to fail include age, heat, thermal expansion, abrasion, pressure, vibration, corrosion, material breakdown or poor design.
Tech Tip: Chrysler 2.0L and 2.4L: Updated Multi-Layer Steel (MLS) Head Gasket Installation Procedures
The MLS gasket was released for production, as a running change, in the 1999 model year for all models except FJ. The new gasket provides superior sealing characteristics, but will require extra care in their installation where a composite gasket was previously in place.
Honda Tech Tip: New Bolts Silence Clunky CR-V
A Honda CR-V driver may complain of a clunking noise from the front suspension when driving over bumps. The probable cause is that the upper arm flange bolts do not properly clamp the upper arm bushings. To correct the condition, replace the upper arm flange bolts as described in this Tech Tip.
Matco Tools Introduces the MC4S 4-Piece Air Hammer Kit
This hammer kit features a unique Black Onyx finish for superior corrosion resistance and 9260 superior grade tool steel for toughest applications.
Tech Feature: Cylinder Head Gasket Service Essentials
Cylinder head gasket design has become more sophisticated than in years past. Critical steps must be taken during the repair process to ensure
Top 5 Tools: Ernie Orgar Jr., Basset’s Service Center
Ernie Orgar Jr., technician Basset’s Service Center Rochester, NY Editor’s note: Ernie was kind enough to send us a few categories of his Top 5 Favorite Tools, so this month, we’re expanding to include his favorite Brake, Diagnostic, Exhaust and Striking tools. Here are my Top 5 Brake Tools: Mac Tools 3” Encapsulated Wire Brush
Internal Engine Repairs: Uncovering the Culprits That Cause Head Gaskets To Fail
The first symptoms of a failing head gasket are usually a slow loss of coolant with no visible leaks, engine overheating and/or a check engine light with cylinder misfire codes. Uncover the culprits and prevent comebacks by following repair procedures to the letter.
Tech Feature: Cooling System and Water Pump Service for the Nissan 3.5L V6
The cooling system on late-model Nissan Altimas and Maximas with the 3.5L V6 engine is similar to many other late-model vehicles in that the water pump is buried and typically takes two to three hours to replace depending on the model, year and your manual dexterity.
Mustang Tech Tip: Oil Leak or Oil Weepage Can Result in Burning Smell
Some vehicles equipped with the Romeo 4.6L 2V engine or 5.4L 2V Windsor and 5.4L Supercharged engine may exhibit an oil leak or oil weepage from the cylinder head gasket at the right-hand rear or the left-hand front of the engine. Oil weepage is not considered detrimental to engine performance or durability. An oil leak may be caused by metal chip debris lodged between the head gasket and the block, chip debris between the cylinder head and the head gasket, or by damage to the cylinder head sealing surface that ….