You searched for DMM - Page 7 of 7 - TechShop Magazine
Baum Tools Offers the Terminator Frequency Probe

The unit is ideal for CAN Bus diagnostics.

Diagnostic Solutions: Rediscovering Oxygen Sensors

If you’re like me, you more often than not find a correct diagnostic direction by going back to what trainers are fond of calling “The Basics.” I capitalized “The Basics” because they are the foundation upon which all of us should be building our diagnostic strategies. The Basics were brought to mind recently when I

Shop Owners and Technicians Offer Up Their ‘Top 5 Tools’

The readers of TechShop – Equipment, Tools & Supplies magazine were asked to submit a list of their top five favorite tools. Here is a sampling of some of the responses that were received ….

Chris Bower, Peckerwoods Pit Stop

Chris Bower, owner/technician Peckerwoods Pit Stop Ventura, CA http://PeckerwoodsPitStop.com iATN (www.iatn.net) — I have been a sponsoring member of this website for over eight years, and have used information available there for more jobs than I can count. This is truly the best tool in my toolbox. Fluke 88 Automotive Meter — This meter is

Top 5 Favorite Tools & Equipment

Rick Moe, owner The Nurburgring, Inc. Saint Bonifacius, MN www.the-nurburgring.com My shop is an independent Porsche repair shop specializing in 356s and early 911s. I’ve been a professional Porsche mechanic for more than 30 years. I established The Nurburgring, Inc. in the Minneapolis area in 1977. I am a factory-trained mechanic with extensive background in

Transmission Service: It’s a Dirty Job, But Here’s What You Need to do It

Automatic transmission work has always been considered hard, dirty work. And rightly so. Pulling a transmission, especially on a front-wheel-drive car or minivan, can be a long day’s work. It usually involves supporting the engine while the transmission and subframe are dropped from the vehicle. Consequently, you need some type of engine hoist or engine

The Top 5 Favorite Tools of Top Technicians

Don Frantz Frantz Automotive Center Cary, NC I own and operate Frantz Automotive Center in Cary, NC. We are a six-bay shop with four techs – all of whom are ASE certified. I, myself, am ASE certified with L1 Certification as well. Frantz Automotive was recently voted "Best of Cary" by the readers of the

Why Go Digital? For Precision and Protection

These days, no matter what kind of automotive repair work you specialize in, virtually every system has a certain amount of electronics. Consequently, one diagnostic tool every technician needs is a digital multimeter. To figure out electrical and electronic problems, you have to “see” what’s going on inside the circuits and components. Trouble is, you

The Top 5 Favorite Tools of the Country’s Top Technicians

Dan & Kris Cesena Honda Hospital, Inc. San Mateo and Milpitas, CA Our top five favorite tools (and why) are: The Snap-on MicroVAT Battery/Starter/Alternator Tester. Why? Well it makes it much easier to test batteries, alternators and starters; it has an infrared port, which sends the data to an optional thermal printer; and with these