Penray Products Keep Fuel Systems Clean, Cars on Road and Away from Gas Pump

Penray Products Keep Fuel Systems Clean, Cars on Road and Away from Gas Pump

Keeping fuel injectors clean is dirty business, but Penray has a complete line of fuel system additives and cleaning products that can help you improve mileage and "clean up" when it comes to the fuel injector cleaning business. Penray's complete line of fuel additives and fuel injector cleaning products includes ....

Keeping fuel injectors clean is dirty business, but Penray has a complete line of fuel system additives and cleaning products that can help you improve mileage and “clean up” when it comes to the fuel injector cleaning business.

“At Penray, our fuel system programs and products can really help grow a shop’s business while providing its customers with better gas mileage and cleaner running engines,” said Mark Fryar, Penray’s national field sales manager. “Incorporating a simple fuel system preventive maintenance program into a shop’s service plan will help increase business and customer satisfaction.”

Penray’s complete line of fuel additives and fuel injector cleaning products includes:

Fuel Injector Air Intake Cleaner

  • Dissolves and helps remove sticky gums, carbon, soil and resin deposits that prevent proper air flow.
  • Special all-angle spray valve allows container to be held at any angle which assures proper spray and pressure penetration to optimize deposit removal.

Fuel Injector Cleaner

  • Cleans harmful deposits and carbon from fuel system as you drive.
  • Provides increased power and acceleration, improved idling, quicker starting and reduced emissions.
  • Effective in all types of fuel injected cars and trucks and in all gasolines, gasohols and diesel fuels.

Fuel System 3-Pack

  • Cleans harmful deposits and carbon from fuel as you drive.
  • Increases power and acceleration, improves idling and air flow and provides quicker starting.
  • Reduces emissions.
  • Lubricates upper cylinder and throttle plate.

Intake Valve Cleaning Kit

  • An effective intake system cleaning kit designed to be used with Penray #2312 Intake Valve Deposit Cleaner.

Intake Valve Deposit Cleaner

  • Reduces intake valve, port and manifold deposits.
  • Improves starting power, driveability and restores performance by removing carbon build-up.
  • Provides upper cylinder lubrication.
  • Helps reduce emissions in both gasoline and diesel engines.

Universal Fuel Injector Tune-Up

  • Designed for use with most professional fuel injector cleaning systems.
  • A fast, dependable way to clean injectors.
  • Formulated for use on all domestic and import fuel injected cars, both throttle body and port fuel injection.
  • Pressurized can is ozone safe.

For more information, visit www.penray.com.

 

 

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers these five: