Spray Nine Earth Soap Provides Greener Cleaning and Parts Washing

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Techshop Magazine
The automotive industry’s knowledge base for equipment, tools and supplies
Uncategorized

Spray Nine Earth Soap Provides Greener Cleaning and Parts Washing

Spray Nine Earth Soap is a concentrated cleaner/degreaser/parts washer that combines a powerful cleaning action with improved safety to humans and the environment. It is an ideal alternative to the harsh solvents typically used in automotive service. Earth Soap is non-flammable, non-carcinogenic, non-corrosive, and ....

TechShop Staff Writers
By TechShop Staff Writers
Published:

Spray Nine Earth Soap is a concentrated cleaner/degreaser/parts washer that combines a powerful cleaning action with improved safety to humans and the environment. It is an ideal alternative to the harsh solvents typically used in automotive service. Earth Soap is non-flammable, non-carcinogenic, non-corrosive and VOC compliant. It contains no solvents, butyl, free acids, free alkalis, phosphates, zone depleting substances, phenolic compounds or ingredients reportable under SARA Title III.

Related Articles

Despite of its friendly, bio-based, biodegradable formula, which is made from natural ingredients including sugar, corn and vegetable oil, Earth Soap is as powerful and effective as any traditional solvent-based cleaner.

Earth Soap can be applied manually for regular cleaning and degreasing or used in conjunction with traditional or heated parts washers (up to 180º F), pressure washers and automatic scrubbers. The fast-acting formula powers out dirt, grease, carbon, oil, adhesives, soot, smoke, stains and more from machinery, parts, tools, toolboxes, work benches and bathrooms. Earth Soap contains corrosion inhibitors, so it is safe to use on metal surfaces.

Earth Soap is available in 32 oz (#27932), 1 gal (#27901), 5 gal (#27905), 55 gal (#27955) and 275 gal (#27975) sizes.

For additional information on products offered by Spray Nine Corporation, visit www.spraynine.com.

You May Also Like

Features

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

Avatar
By Carlton Banks
Technical Contributor for TechShop, Carlton is an emissions trainer for three Midwest states. He's made it a mission to find the truth in emissions-related codes.
Published:

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Read Full Article

More Uncategorized Posts
Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

By Glen Beanard
Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

By Gary Goms
5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

By Sean Phillips
Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

By TechShop Staff Writers

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

By TechShop Staff Writers
The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

By TechShop Staff Writers
Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

By Mark Claypool
Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers these five:

By TechShop Staff Writers