Top 5 Tools: Henry Woodbury, Woodbury Garage

Top 5 Tools: Henry Woodbury, Woodbury Garage

Henry Woodbury, owner
Woodbury Garage
Athens, VT


Atlas PV-10 Lift
— Without a lift, very little, if any, meaningful work would get done, but this unit is so easy to work with, versatility has a new meaning.

Hewlett-Packard Pavilion Slimline S7320n Computer — This tiny unit takes up almost no room in my crowded one-man shop. I can’t imagine going back to index cards for keeping track of inventory, hand filling work orders in triplicate, and what did we all do before online parts ordering? Remember trying to describe parts over the phone to a parts counter employee?

iATN — Just reading the horror stories on some of the vehicles out there is a form of education. I may not remember all the details when one of these less familiar vehicles shows up (quite likely on a flatbed), but I am more likely to cut myself some extra slack to allow for a difficult diagnosis, and to work more carefully and methodically on vehicles I have had less experience with. And when I can’t figure it out myself, a quick request for help usually puts me on the right trail to a proper fix.


Real Time Labor Estimator
— The first year I got this little gem, my shop’s gross income DOUBLED. Before, if I gave a customer a rather wide or open-ended guesstimate as to the cost of a needed repair, the usual answer would be “I’ll get back to you.” Now I give them one figure, and the response is “When can you do it?”

Craftsman 16-Gallon Wet/Dry Vac — My shop is cleaner than ever. I have used this for cleaning gravel out of tractor cabs, mouse nests out of air conditioning systems, water off the floor, and even used it to clean and patch a leaking engine oil pan that couldn’t be replaced without pulling the entire engine and transmission by drawing a vacuum on the crankcase so the leak could be cleaned, degreased with solvent and epoxied without any oil constantly seeping out to spoil the bond.

You May Also Like

Matco Debuts 5-Piece Purple Screwdriver Set

The purple screwdriver set includes a variety of sizes and types.

Matco Tool's continues its purple wave, this time with a 5-Piece Purple Screwdriver set.

The screwdriver blades are molded into the handle and have a wide forged butterfly in the end, ensuring that the blade will not turn in the handle, pound through, or pull out, says the company.

Scan Tools: Solving the Diagnostic Puzzle

“The fact is, the most expensive tool may not be the best tool for you. It depends on what vehicles you work on and what you want out of the tool.” – Dwayne Myers, Dynamic Automotive, Frederick, MD Related Articles – ISN’s Annual Tool Dealer Expo Gives Attendees Sneak Peek at New Products – Editor’s

ISN’s Annual Tool Dealer Expo Gives Attendees Sneak Peek at New Products

The TechShop team and more than 3,500 attendees from around the world recently joined Integrated Supply Network (ISN) at its 14th annual Tool Dealer Expo June 24-25 in Orlando, FL. There, suppliers launched new products and gave away more than $2 million in cash and prizes throughout the weekend event. Related Articles – Beyond the

Editor’s Notes: ‘The Rising Tide Lifts All Boats’

For the past year and a half, in addition to being editor of TechShop, I’ve also carried the role as editor of our student publication Tomorrow’s Tech, which is delivered to NATEF-certified automotive technical programs throughout the U.S. With this responsibility, I’m keenly aware of the industry’s need for the next generation of automotive service

Make Aluminum Welding Easier with Cebotech’s MIG Welders

All three of Cebotech’s MIG welders (models 301, 302 and 322) were designed to make aluminum welding easier. Related Articles – New Snap-on Limited Edition Speed Demon Roll Cab – AMD-035 Membrane Dryer Provides Ultra-Clean & Ultra Dry Air – New Rislone ‘DEF Crystal Clean’ Clears P20EE Codes They’re supplied with built-in welding programs for easy setup, and are

Other Posts

Mayhew Debuts New Fluorescent Handled Screwdrivers

The new screwdrivers, Slotted and Phillips, are part of the greater Made in the USA product line and are available as both sets and individual tools.

Snap-on Lights Up the New Year with New Lighting Tools

The three new lights are ready for technicians to use on the go.

4-Piece Purple Long Hook and Pick Set from Matco

Engineered for ideal user comfort and grip.

AIRCAT 6250 1⁄4” Mini Rt. Angle Die Grinder

The low weight ultra-compact design provides added control and maneuverability.