AfterMarketNews Brake&Frontend BodyShopBusiness Counterman EngineBuilder Fleet Equipment ImportCar Motorcycle & Powersports News Servicio Automotriz Shop Owner Tire Review Tech Shop Tomorrow's Tech Underhood Service Speedville

Honda Civic: Failed PCMs And CAN System Diagnostics

It’s not unusual for me to get help requests through my e-mail. Sometimes it’s from working technicians, other times it’s from vehicle owners who can’t get their problems solved through professional repair shops. In early 2014, I received one...

Read more...

Servicing Mercedes-Benz AIRMATIC Suspensions

The Mercedes-Benz AIRMATIC suspension system was introduced in 1999 on the S-Class and has subsequently been used on the E-Class and most of the automaker’s SUVs. The system employs electronically controlled air springs that provide an ideal balance...

Read more...

Mazda: Performing Regular Undercar Maintenance

In this article, we’ll take a look at brake and undercar service on the Mazda vehicle lineup, with the footnote that even though this type of work ­becomes routine when you have a preventive maintenance mindset, good work habits from beginning to end...

Read more...

GM Power Steering Noise/Leaks

GM: Power Steering Noise/Leaks from Power Steering Pump, Gear or High Pressure Hose During Extreme Low Temperature Conditions MODELS: -2009-2015 Buick LaCrosse (Equipped with Hydraulic Power Steering) -2010-2013 Buick Regal -2012-2015 Buick...

Read more...

Ford Edge Brake Replacement

Ford Edge Brake Replacement Basics The Ford Edge is an SUV based on the CD3 platform. The brakes on these vehicles are straightforward and do not break any new ground. There were no major changes to the brake systems from 2007 to the current model. For...

Read more...

Live-Axle Wheel Bearing Replacement

Replacing wheel bearings on a vehicle with a live rear axle may not be one of the most frequent jobs, but it can be one of the most profitable. While the basics have not changed in more than 60 years, new seal materials and differential designs have...

Read more...

Solving Carbon Deposits In Direct Fuel Injection Engines

Symptom: Misfire codes, stumbling and suspicious fuel trim numbers. On a scan tool, the engine may show a loss in volumetric efficiency. The driver may complain about a loss of power, poor fuel economy and hard starts. Cause: Carbon deposits on...

Read more...

Using Your Oscilloscope: Current Ramp Test Ignition Coils

Regardless of design configuration, the role of the ignition coil is to multiply battery voltage into high voltage. Following Ohm’s law for the conversion of volts to amperes, oil-filled coils generally require 3 to 5 amperes of primary current...

Read more...

Serial Data Bus Diagnostics

Understanding The Function of Serial Data Buses If serial data buses did not exist, a wiring harness would have to be five times its normal size and use twice as many sensors to deliver the same level of functionality and safety we see in the modern...

Read more...
Home Products Matco Tools Introduces the MLED60 60 LED Light with Lithium Battery

Print Print Email Email

Matco Tools introduces a new 60 LED Light with Lithium Battery, the MLED60.


The MLED60 features the following:
• 60 super bright LED;
• Single charge provides up to four hours of continuous use;
• Designed with complete discharge protection and indicator lights; and
• 120V AC main charger included.

Visit the Matco Tools website today at http://www.matcotools.com or see your local Matco distributor for more information regarding the MLED60.

The following two tabs change content below.
TechShop Staff Writers

TechShop Staff Writers

TechShop Staff Writers

Latest posts by TechShop Staff Writers (see all)

Latest articles from our other sites:

GF-6 Oil Specification: What It Means For Your Shop

The Obama Administration finalized fuel economy standards in 2012 designed to increase fuel efficiency standards to 54.5 mpg for passenger cars and light-truck applications by 2025. This push for greater...More

Hunter's Quick Check And Quick Tread Fully Integrated With AutoServe1

Hunter Engineering’s Quick Check and Quick Tread now fully integrate with the AutoServe1 digital vehicle inspection and customer communication system. According to AutoServe1, its product is one of...More

Hydro-Boost: The Non-Vacuum Booster

Hydro-boost brake boosters can be mysterious to the untrained technician because part-swapping will not solve some brake issues. These systems use the pressure of the power steering pump to power the brake...More

LTI Tools Offers Universal Wheel Bearing Hub Removal Tool

Safely remove all frozen hubs instantly with LTI Tools’ Universal Hub Shocker Wheel Bearing Hub Removal Tool (LT830A). Its universal fit mounts to all axle bolted hubs – 5-, 6- and 8-lug hubs....More

Continental Announces New VDO Xtreme LED Tachometer

Continental Commercial Vehicles & Aftermarket has announced the new VDO Xtreme LED Tachometer for street rod and hot rod enthusiasts. The company says it provides easy programmability, a top range...More

GM TPMS Tips

Shops should use a TPMS tool that can reset the sensor positions after rotation. There is a method in the owner’s manual to “match” the sensors that involves deflating a tire for eight seconds. On...More