Technicians at Minnesota Auto Dealerships Go on Strike

Technicians at Minnesota Auto Dealerships Go on Strike

Approximately 30 technicians and parts workers have gone on strike at auto dealerships in Duluth, MN. According to an article in the Superior Telegram, the main sticking point in contract negotiations is that the dealerships want to reduce the times technicians have to complete repairs.

Approximately 30 technicians and parts workers have gone on strike at auto dealerships in Duluth, MN. According to an article in the Superior Telegram, the main sticking point in contract negotiations is that the dealerships want to reduce the times technicians have to complete repairs.

Below is the article as it appeared on the Superior Telegram website.

Krenzen auto mechanics go on strike

By Candace Renalls, Duluth News Tribune
Published June 26, 2012

Fourteen mechanics and parts employees at the Krenzen car dealership in Duluth walked off the job Monday morning and began striking after employers failed to return to the bargaining table.

The four-year contract between United Auto Workers Local 241 and Krenzen and three Hermantown dealerships expired April 31. Subsequent talks through a federal mediator broke down in May.

The walkout at Krenzen followed a similar walkout of 17 mechanics and parts workers at Kolar Toyota on May 15. Striking mechanics now are picketing both sites.

About 30 mechanics and parts workers who are also covered by the contract remain on the job at Duluth Dodge and Kolar Chevrolet. Those dealerships, as well as Krenzen and Kolar Toyota, are represented by the Duluth Automobile Dealers Association in the contract negotiations.

“If we don’t get them back to the bargaining table, others will walk out,” said David Friske, a Krenzen mechanic who was picketing outside the dealership on Monday afternoon.

The 2.5 percent a year wage hike offered isn’t the issue, according to Alex Freeman, a striking master mechanic at Kolar Toyota. Higher employee contributions to health insurance and employees being asked to pay a surcharge for their underfunded pension fund are issues, he and union president Del Soiney say.

But the biggest sticking point is that dealerships want to reduce the times mechanics have to do repairs, veering away from industry guidelines used for years, according to the strikers.

“They want to eliminate wording in the contract so they can charge whatever they want and pay us whatever they want,” Freeman said.

Kevin Bushe, a mechanic and union steward at Krenzen, summed it up this way: “They’re not giving mechanics enough time to do the work. That’s the main deal.”

To read the entire article on the Superior Telegram website, click HERE.

You May Also Like

Registration Open for ETI ToolTech 2024

The event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

The Equipment & Tool Institute's (ETI) Mission is to advance the vehicle service industry by providing technical data and open dialog between the manufacturers of transportation products, government regulators and the providers of tools, equipment, and service information. 

This mission is put into action at the annual ETI ToolTech event. This year, the event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion
Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool

Other Posts

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

ISN Expands Freedom Program for Mobile Tool Dealers

ISN’s Freedom Program is designed to provide experienced, successful mobile tool dealers with support to become an independent mobile dealer and expand their growth.

Snap-on Continues to Offer Free Weekly Product Training Sessions

The online training and question and answer sessions are free of charge.

Repairify Announces Executive Leadership Changes

The company has named Craig Edmonds as president of asTech among other executive appointments.