New Lifting Solutions Introduced by Zendex Tool Corporation at SEMA

New Lifting Solutions Introduced by Zendex Tool Corporation at SEMA

Zendex Tool Corporation, the manufacturer of GoJak, introduced its new Gator Power Jaks Lift at SEMA 2013. Its heavy-duty air spring can cycle thousands of times to lift loads with just a touch of its advanced, feather valve.

Zendex Tool Corporation, the manufacturer of GoJak, introduced its new Gator Power Jaks Lift at SEMA.

The Gator is a flat-nosed, low-profile pneumatic jack that is virtually maintenance-free and designed to last. Its heavy-duty air spring can cycle thousands of times to lift loads with just a touch of its advanced, feather valve.

A mechanical gravity safety lock releases conveniently at the control valve. Gator’s frame is made from heavy-duty, all-welded steel plate.

Model 2117 starts in the lowered position from 2-3/4” to a raised height of 17” and lifts 2,100 lbs.

Model 3621 starts from 3-3/4” to a raised height of 21” and lifts 3,600 lbs.

Both units operate with pressure at 110 psi.

Zendex Tool Corp.
Phone: 203-778-0400Fax: 203-778-0036

You May Also Like

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

The new BendPak SP-7XE Series of full-rise scissor lifts provides the performance and undercarriage access of traditional two-post lifts in a more compact, space-saving package. Floor- and flush-mount (SP-7XEF) models of this frame-engaging lift are available. 

With a rated capacity of 7,000 pounds, SP-7XE Series lifts are designed for full-service auto shops, quick-lube pits, and any other service area with little room to spare. They can raise most passenger vehicles and light trucks nearly six feet, so techs can easily access all critical undercarriage areas without having to stoop or crawl across the floor. They fold flat when not in use. 

BendPak to Debut Eight-Armed Car Lift Concept at NADA

Octa-Flex improves technician productivity, convenience and ergonomics, according to BendPak.

Matco’s New Ghost Cart: Where Tools and Style Spookily Align

Haunt your shop with efficiency: Matco’s 2023 Ghost Cart is sleek and functional.

Matco Ghost Cart tool storage
New Cool Boss CB-26: Plug In and Chill Out 

Portable evaporative cooler drops temperature up to 26 degrees at work or play.

Updated Jump-N-Carry 12V Jump Starter, Power Supply

Delivering 550 Start Assist Amps of starting power, the JNC345 can tackle a wide variety of starting tasks.

Other Posts

TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion
Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool