Ranger Products Offers QuickJack Portable Jack System

Ranger Products Offers QuickJack Portable Jack System

Ranger Products, a division of BendPak, recently unveiled its new QuickJack portable jack system that makes vehicle maintenance - on the track and off - convenient and lightning fast. The 3,500-lb. capacity lightweight QuickJack can go anywhere and can be easily stowed in the trunk or back seat of most cars when not in use.

Ranger Products, a division of BendPak, recently unveiled its new QuickJack portable jack system that makes vehicle maintenance — on the track and off — convenient and lightning fast. The 3,500-lb. capacity lightweight QuickJack can go anywhere and can be easily stowed in the trunk or back seat of most cars when not in use.

Bring it to the track or drop it on your garage floor to perform routine maintenance in the comfort of your home, all in seconds.

Simply position the lightweight jack frames under the vehicle, push the raise button on the remote hand-held pendant control and in less than 10 seconds the entire car is almost 2 feet off the ground, ready for tire changes, chassis tuning or other maintenance.

The QuickJack collapses to a low 3-in. profile so it fits where other jacks don’t.

It features an open-center design, rugged safety lock bars, remote pendant control on a 20-foot cord, quick-connect hoses and a built-in flow divider for precisely equalized lifting. The QuickJack comes complete with an eight-piece set of rubber lift blocks, convenient positioning handles and a mini portable hydraulic power unit that runs off standard 110-volt current. An optional 12-volt DC unit also available.

For information contact Ranger Products at 805-933-9970 or visit www.quickjack.com.

You May Also Like

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

The new BendPak SP-7XE Series of full-rise scissor lifts provides the performance and undercarriage access of traditional two-post lifts in a more compact, space-saving package. Floor- and flush-mount (SP-7XEF) models of this frame-engaging lift are available. 

With a rated capacity of 7,000 pounds, SP-7XE Series lifts are designed for full-service auto shops, quick-lube pits, and any other service area with little room to spare. They can raise most passenger vehicles and light trucks nearly six feet, so techs can easily access all critical undercarriage areas without having to stoop or crawl across the floor. They fold flat when not in use. 

BendPak to Debut Eight-Armed Car Lift Concept at NADA

Octa-Flex improves technician productivity, convenience and ergonomics, according to BendPak.

Matco’s New Ghost Cart: Where Tools and Style Spookily Align

Haunt your shop with efficiency: Matco’s 2023 Ghost Cart is sleek and functional.

Matco Ghost Cart tool storage
New Cool Boss CB-26: Plug In and Chill Out 

Portable evaporative cooler drops temperature up to 26 degrees at work or play.

Updated Jump-N-Carry 12V Jump Starter, Power Supply

Delivering 550 Start Assist Amps of starting power, the JNC345 can tackle a wide variety of starting tasks.

Other Posts

TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion
Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool