Two Products in JDI's Fuel Chief Gas Caddy Line Now Carry UL Listing

Two Products in JDI’s Fuel Chief Gas Caddy Line Now Carry UL Listing

JohnDow Industries (JDI) recently announced that two more products in its Fuel Chief gas caddy line have achieved UL Listing status. With the addition of the FC-P30-UL and the FC-P30A-UL units, JDI says it continues to be the only manufacturer with UL Listings for gas caddies, making these units the "industry standard."

JohnDow
Industries
(JDI) recently announced that two more
products in its Fuel Chief gas caddy line have achieved UL Listing status. With
the addition of the FC-P30-UL and the FC-P30A-UL units, JDI says it continues
to be the only manufacturer with UL Listings for gas caddies, making these
units the “industry standard.”

 The UL certification comes from the
Underwriter’s Laboratories National Safety Testing Agency for the U.S., acting
as a partner with manufacturers to provide safe products to consumers through
testing, certification and follow-up audits.

Fuel Chief’s two 30-gallon caddies have
been redesigned with the professional technician in mind. They are UL-listed
professional units for the portable fuel storage and handling of gasoline,
kerosene and diesel fuels. The FC-P30 includes a manual pump while the FC-P30A
uses an air operated pump to siphon fuel to and from the vehicle being
serviced.  

Features for both units include:

• Cart style design for easy portability
and use;

• New molded front plastic panel cover;

• Redesigned front enclosure for
improved stability and utility;

• Upgraded rear wheels with manual brake
mechanism;  

• Four-way control valve to select the
flow;

• New UL listed hoses and couplings; and

• Vacuum breaker to prevent back
siphoning.

Under OSHA regulation 29 CFR 1910.106,
approved equipment must be tested, certified and listed by a national testing
laboratory. This regulation makes it “the employer’s responsibility to protect
its employees from workplace hazards by providing appropriate methods of hazard
control.”  The FC-P30-UL and the FC-P30A-UL more than satisfy this
regulation, according to JDI.

You May Also Like

New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits

Ford Power Stroke 6.7L & GM Duramax 6.6L ProKits easily remove compression seals and shorten repair times

ProMAXX Tool introduces the Ford Power Stroke 6.7L Fuel Injector Copper Compression Seal Puller and Seal Saver ProKit (PMXISPS200PRO). The tool is designed to empower technicians to quickly remove seals from the head effortlessly and securely. In the coming months, a GM 6.6L Duramax Compression Seal Puller/Saver version will be available.

AMSOIL Introduces New OE 0W-40 100% Synthetic Motor Oil

The new OE 0W-40 is primarily for newer RAM HD trucks equipped with the 6.4-liter Hemi engine.

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

Other Posts

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.

Snap-on Debuts New General Service Set 

The company says technicians now have maximized tool concentration in the smallest footprint.

Chevron Introduces New Rykon Formula to Grease Product Line

The new calcium sulfonate complex-based grease is designed for heavy-duty and extreme pressure applications.