New 6/12V 4.0A Battery Charger / Maintainer from Clore

New 6/12V 4.0A Battery Charger / Maintainer from Clore

The PRO-LOGIX PL2140 utilizes advanced microprocessor-controlled logic to deliver a fully automatic, precisely controlled charging routine to optimally charge and maintain each battery serviced.

Clore ProLogixClore Automotive introduces Model No. PL2140, a 4 Amp 6/12 Volt battery charger/maintainer, from SOLAR. Combining fully automatic operation and the ability to properly maintain the different batteries found in almost any car, truck, SUV, ATV, motorcycle, boat or personal watercraft application, the PL2140 is the perfect charger/maintainer for busy shops and enthusiasts alike.

The PRO-LOGIX PL2140 utilizes advanced microprocessor-controlled logic to deliver a fully automatic, precisely controlled charging routine to optimally charge and maintain each battery serviced. Plus, it has the ability to properly charge virtually any lead acid battery type, including conventional, AGM, gel cell, spiral wound, deep cycle and marine batteries.

The PRO-LOGIX PL2140 adapts its approach based on the needs of each battery it services. Such adaptations can include activating a soft start mode on deeply discharged batteries, a battery repair mode on older/distressed batteries and temperature compensation to properly manage charging in extreme temperatures. In addition to providing advanced battery charging, it also offers an advanced battery maintenance routine once the battery has reached full charge. This is ideal for extended storage applications, such as those found in collision repair, as well as the storage of seasonal use vehicles.

The PL2140 features a special operator-activated Recovery Mode, enabling the unit to automatically recover from power outages. This is extremely helpful if the charger is being used to maintain the battery on a vehicle where regular oversight or intervention is not possible. It also incorporates numerous features to make charging safer for the operator and the vehicle/battery being charged, including over-voltage protection, reverse polarity protection and battery fault detection.
More information can be found at www.cloreautomotive.com.

Clore Automotive
Phone: 800-328-2921Fax: 913-310-1075Contact: Jim O\'Hara

You May Also Like

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

The Master set includes: #5000 - Cam Phaser & Timing Chain Locking/Holding Set – VVT. #3925 - Cam Phaser Holding Set - Left/Front & Right/Rear – VVL. Cam Phaser & Timing Chain Locking / Holding kit for 3.0L, 3.2L, 3.6L VVT & VVL Pentastar engines. Includes 2 camshaft phaser holders, 5 timing chain holders & L-pin.

BendPak to Debut Eight-Armed Car Lift Concept at NADA

Octa-Flex improves technician productivity, convenience and ergonomics, according to BendPak.

Matco’s New Ghost Cart: Where Tools and Style Spookily Align

Haunt your shop with efficiency: Matco’s 2023 Ghost Cart is sleek and functional.

Matco Ghost Cart tool storage
New Cool Boss CB-26: Plug In and Chill Out 

Portable evaporative cooler drops temperature up to 26 degrees at work or play.

Updated Jump-N-Carry 12V Jump Starter, Power Supply

Delivering 550 Start Assist Amps of starting power, the JNC345 can tackle a wide variety of starting tasks.

Other Posts

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.

Snap-on Debuts New General Service Set 

The company says technicians now have maximized tool concentration in the smallest footprint.