New Airtex Vehicle Electronics Video Tackles Complex P0171 Challenge

New Airtex Vehicle Electronics Video Tackles Complex P0171 Challenge

The new seven-and-a-half-minute video, "P0171 Chevrolet Trailblazer Diagnostics," explores the reasons for intermittent lean fuel conditions - and the resulting diagnostic trouble code - on a 2006 Trailblazer equipped with a 4.2-liter engine.

The Technical Services team at Airtex Vehicle Electronics has released a fascinating diagnostic video that unlocks the secret to intermittent P0171 trouble codes on some Chevrolet Trailblazer models.

The new seven-and-a-half-minute video, “P0171 Chevrolet Trailblazer Diagnostics,” explores the reasons for intermittent lean fuel conditions – and the resulting diagnostic trouble code – on a 2006 Trailblazer equipped with a 4.2-liter engine. “Inspector Tech,” a new figure in the Airtex Vehicle Electronics series, accepts the case after a vehicle dealership is unable to eliminate the issue by replacing O2 sensors and intake manifold gaskets.

“As Inspector Tech reminds the viewer, it’s always a mistake to start replacing parts before you have collected all of the evidence,” explains Jim Gehl, technical services instructor for Airtex Vehicle Electronics. “In this case, both the dealership and an independent shop should have studied a number of parameters in the freeze frames and recorded movies available through their scan tools.”

The Airtex team discovered that the vehicle consistently experienced a spike in long-term fuel trim after approximately eight minutes of operation following a cold start, indicating that excess oxygen was entering the exhaust system upstream of the front 02 sensor. Through additional research into the vehicle’s emissions control equipment, the team determined that the probable cause was a malfunctioning air solenoid control valve in the vehicle’s secondary air injection system. This system helps reduce catalyst light-off time by introducing pressurized fresh air into the exhaust stream during cold warm-up. A comparatively inexpensive new air solenoid control valve solved the problem.

“This is great example of the value of performing a truly comprehensive diagnosis using modern equipment,” Gehl said. “Two service providers had spent hours trying to solve the problem without having all of the necessary data. More importantly, they had lost the confidence of the vehicle owner.”

The new program is the latest in a series of nearly 25 hands-on diagnostic case study videos available through the “Tech Tools” link at www.airtexVE.com. These videos also are available through the Airtex Vehicle Electronics channel at www.YouTube.com.

For more information regarding Airtex Vehicle Electronics diagnostic resources and the company’s comprehensive range of premium quality replacement vehicle electronics, visit www.airtexVE.com.

You May Also Like

Registration Open for ETI ToolTech 2024

The event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

The Equipment & Tool Institute's (ETI) Mission is to advance the vehicle service industry by providing technical data and open dialog between the manufacturers of transportation products, government regulators and the providers of tools, equipment, and service information. 

This mission is put into action at the annual ETI ToolTech event. This year, the event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion
Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool

Other Posts

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

ISN Expands Freedom Program for Mobile Tool Dealers

ISN’s Freedom Program is designed to provide experienced, successful mobile tool dealers with support to become an independent mobile dealer and expand their growth.

Snap-on Continues to Offer Free Weekly Product Training Sessions

The online training and question and answer sessions are free of charge.

Repairify Announces Executive Leadership Changes

The company has named Craig Edmonds as president of asTech among other executive appointments.