VIDEO: SP Tools at SEMA 2019
Lee Locklear of SP Tools talks with David Anken of ToyMakerz about some of the new SP Tools for 2019.
Accurate Measuring with SP Tools USA Flex-Head Torque Angle Pro
One of the essential tools in a technicians’ toolbox is a torque wrench. The new SP Tools Flex-Head Torque Angle Pro line consists of 3/8-in. and 1/2-in. flex-head digital torque wrenches. The Torque Angle Pro features a reversible ratchet head, torque target alarm, digital display and a flexible head to reach confined spaces.
SP Tools USA Launches SMD LED Wireless Charging Work Lights
SP Tools has developed a wireless charging work light kit SP81499 that includes an SMD LED 500Lumen work light, 300Lumen pocket work light, and dual-zone wireless charging pad.
SP Tools Named Official Tool Brand for ToyMakerz Workshop
SP Tools announced it has been named the official tool brand for the groundbreaking series ToyMakerz, featuring extreme vehicle creations of ToyMakerz CEO David Ankin.
SP Tools Offers Duramax Water-In-Fuel Sensor Wrench
When replacing the fuel filter on a 2001 to current GM Duramax light-duty truck, the water-in-fuel sensor located in the bottom of the filter must be removed and reused in the new filter.
SP Tools’ BMW Injector Puller Allows Easy Removal Of Injectors On All BMW Vehicles With Direct Injection
SP Tools’ BMW Injector Puller’s compact size allows easy installation to the injector and easily pulls injectors out. This easy removal greatly reduces the amount of time to replace injectors, which makes more profit for technicians in the end.
SP Tools Offers Small Pin Cam Gear Holder
This wrench, #11500, is designed with small diameter grooved pins to allow access to small hole cam gears. The specially designed pins lock onto the cam gear allowing secure grip when tightening or loosening cam gear bolts. It is designed for use on early Honda and Acura vehicles.
SP Tools Offers BMW Injector Puller
SP Tools’ BMW Injector Puller, #11800, was developed to allow easy removal of injectors on all BMW vehicles with direct injection. The Injector Puller’s compact size allows easy installation to the injector and easily pulls injectors out. This easy removal greatly reduces the amount of time to replace injectors, which makes more profit for technicians in the end.
Remove And Install Lower Ball Joints With SP Tools’ Honda/Acura Air Hammer Ball Joint R&R Tool
This unique tool was designed to remove and install lower ball joints on the car versus removing the steering knuckle and using a press. Using an air hammer, the job of removing and installing ball joints is a simple procedure saving one hour per side.