SP Tools Offers Honda/Acura Front Compliance Bushing R&R Tool
This unique tool was designed to aid in the removal of the front lower control arm compliance bushings both 65 mm and 74 mm sizes found on many Honda and Acura vehicles.
SP Tools Offers Chrysler/GM Damper Pulley Puller With Silver Legs
The Chrysler/GM Damper Pulley Puller (#64900A) from SP Tools has been upgraded with spring-loaded “silver” legs that allow the technician to set leg position prior to installing on the harmonic damper pulley to aid in the removal of the harmonic damper pulleys found on many Chrysler and GM engines.
SP Tools Offers Toyota ‘Top Access’ Serpentine Belt Tensioner Wrench
The Toyota ‘Top Access’ Serpentine Belt Tensioner Wrench, part #10200, allows the technician to access the tensioner from the top side of the engine. This saves the technician tremendous time as compared to the current method of accessing from the bottom of the engine.
SP Tools Offers Honda/Acura Serpentine Belt Tensioner Tool
This unique tool was designed to reach down through the engine compartment in areas not easily accessed with conventional tools. This tool has a specific “clock” angle of the 6 point 19 mm end with carefully calculated handle geometry enabling access to the hydraulic dampener tensioner.
Honda/Acura Front Compliance Bushing R&R Tool From SP Tools
This unique tool was designed to aid in the removal of the front lower control arm compliance bushings both 65 mm and 74 mm sizes found on many Honda and Acura vehicles. With time, the front compliance bushings wear out and rip causing the vehicle to have a knock, pop or squeak from the front suspension.
SP Tools Offers Honda/Acura Air Hammer Ball Joint R&R Tool
This unique tool was designed to remove and install lower ball joints on the car versus removing the steering knuckle and using a press. Using an air hammer, the job of removing and installing ball joints is a simple procedure saving one hour per side, said the company.
SP Tools Offers BMW/Sprinter Van Fan Clutch Wrench
This unique tool allows the technician to hold the water pump pulley securely while removing the viscous fan clutch.
SP Tools Offers Universal OHC Valve Spring Compressor
With this latest evolution to Schley Products’ Universal Valve Spring Tool (#91400B), the company has added the ability to actuate the compression tube even in tight confined locations like under the cowl where the lever cannot be moved or may not even fit.
SP Tools’ GM Duramax Flywheel Lock Easily Remove Crankshaft Bolts
The GM Duramax Flywheel Lock (69250) from SP Tools was designed to hold the flywheel stationary when removing or replacing the crankshaft bolt on the 6.6L Duramax diesel engines. The crankshaft bolt is extremely tight and without a holding tool, removing the crankshaft bolt is very difficult.
SP Tools Offers Honda/Acura Serpentine Belt Tensioner Tool
The Honda/Acura Serpentine Belt Tensioner Tool (#68170) from SP Tools has been re-engineered to rotate the older 14 mm and newer 19 mm hex-style serpentine belts tensioners. These are in locations that make it difficult to service with a standard wrench or socket.