Blair
Equipment Co., Inc., producers of precision sheet metal holemaking
tools and spotweld cutters used in automotive body repairs, fabrication and
aftermarket equipment installations introduces the Enforcer Spotweld Drill
(Part No. 11300).
The pneumatic powered spotweld drill removes spotwelds in
seconds with minimal effort. The patented Enforcer Spotweld Drill can remove
spotwelds in all types of automotive materials and features a lower drill bit
speed of 800 rpm which is more effective on today’s ultra-high strength steels
and Boron materials. The Enforced lever is manually operated to feed the
spotweld cutter into and through the spotweld. This manual operation maximizes
drill bit torque with no reduction in air flow and improves spotweld removal
rates. The drill bit penetration is adjustable for exact depths ensuring only
one panel is drilled through resulting in no damage to the underlying panel.
The comfort grip handle reduces operator fatigue and ensures a solid grasp even
in slippery conditions.
Included
with the Enforcer Spotweld Drill is: (1) 8 mm Blair solid carbide triple fluted
drill bit, two steady frame C-Clamps which swivel 360° (one for panel depths of
2-5/16” and one for 5-5/8”) and a custom molded storage case.
Operation
of the Enforcer Spotweld Drill requires 90 psi and 4 CFM. The unit is equipped
with a silencer for reduced noise levels of 84 dB.
The
Enforcer Spotweld Drill joins Blair’s series of available tools including:
fractional and metric Rotabroach sheet metal hole cutters available
individually from 1/4” to 1-1/2” in diameter and also are available in kits,
Blair Holcutters for larger hole requirements with sizes from 11/16 thru
3" for materials 1/8" thick, Spotweld Cutters for auto body repair
and restoration, and the Tornado II portable paint shaker is used extensively
in collision shops throughout North America.