Electronic Specialties, Inc.

The LOADpro test leads allow you to instantly load the circuit to see if current can flow.

The Code Buddy PRO+ can display the full live data stream, giving valuable feedback while the vehicle’s engine is running.

This tester connects in place of the relay and allows control of circuit power downstream of the relay.

DT-8806H is an FDA-approved device and is capable of safely measuring forehead temperatures. It can be used on customers and employees in today's COVID situations.

A compact instrument designed for easy use while setting idle speeds and tuning.

Diagnostic codes and additional features add to the benefits of this kit.

Multiple features provide benefits for efficient electronic diagnosis.

Electronic Specialties’ new No. 804 10-piece back probe kit features the company’s most popular back probes. Designed for diagnostic and electrical troubleshooting, each probe connects to standard 4mm banana plugs.

This assortment is designed to work with industry standard 4mm banana plugs.

The curved shape of the probe allows better electrical contact and fitment when back probing round connector pins.

This comprehensive test kit enables connection to most automotive and heavy-duty and marine connectors, both foreign and domestic.

This 54-piece kit features the company’s widest variety assortment with 26 different connectors.

The meter has 10 testing functions for electrical systems and alternator outputs, blower motors, electric motors and more.

This 54-piece kit features the company’s widest variety assortment with 26 different connectors — including flat/spade types, round terminals, Micro64 styles, Deutsch connectors and Micro50 terminals — all connecting to DMMs and scopes via the included 48” stacking banana plug test leads.

The alligator clips screw on and off, so the test lead can be clamped permanently to the test point, freeing the tech’s hands for other tasks.

These probes are designed to pierce wire insulation and tap readings in wires where a direct connection is not possible.

LOADpro 48V test leads were designed specifically for finding wiring faults in electric lift trucks, automotive, light truck and heavy-duty vehicles and equipment. They work with almost any digital multimeter.

A new design utilizes adapters to allow for easy connection into three different fused sockets, allowing for easy and "in series" current draw measurements taken directly at the fuse panel.

This kit features a selection of terminal adapter sets fitted specifically for diagnostic testing and connections into Deutsch-style connectors.

Terminal adapters connect via the included 48” stacking banana plug test leads. The kit is designed to provide wide testing coverage and quicken the test process.

Relay Buddy Pro provides an indication of the general health and functioning of the most common 4/5 Pin 12- and 24-volt relays.

The 329’s three built-in hour meter modes can be used to track engine run time, engine service intervals or job working time.

This kit features adapters that are designed to make a secure electrical fitting and connection for testing and diagnostic purposes. Properly fitted adapters will quicken the test process.

This is a hands-on training system in which you apply, solder and install all the parts onto the training cards. Each card becomes a working circuit that you built.

This kit includes a basic assortment of accessory test leads, which are in compliance with IEC Safety Rating of CAIII 1000V. They are high-quality test leads with an extended length of 52” and can be used safely in testing applications on hybrid and EV vehicles.

Starter Buddy works on both 12- and 24-volt systems and includes a DVD with extensive product training by Dan Sullivan. It performs a live cranking test on the vehicle to determine exactly which part of the electrical circuit has the issue.

The amp shutters prevent mistake operation, reduce blown fuses and greatly improve user safety. The 582 also features a fused 20-amp test range in both DC and AC.

The #192 was developed in response to the customer feedback the company received with the original Relay Buddy. The new tool provides an indication of the general health and functioning of the most common 4/5 Pin 12- and 24-volt relays. It checks the control side of the relay by applying a signal to the relay coil while it checks for proper functioning of the relay contacts.

The 726 performs a complete starting and charging system analysis along with a diagnosis of battery condition. The user is guided through the test sequence via step-by-step prompts on the LCD display. The built-in printer provides hard copy test results for customers, management and better record keeping.

This high accuracy meter is specifically designed for diagnosing parasitic battery drain.

Quickly and accurately test relays with this professional tool.