Florida Pneumatic has introduced the FP-740TLI, a 1/2”
impact wrench that incorporates a graduated torque setting dial whereby the
operator may select four specific torque settings in the forward direction.
The
torque settings are in graduations of 65 ft.-lb., 80 ft.-lb., 100 ft.-lb. and
120 ft.-lb., while delivering a maximum 800 ft.-lb. torque in the reverse
direction.
The FP-740TLI also features a unique Florida Pneumatic “ECD” easy
change of direction bar for ultimate efficiency when removing and replacing lug
nuts.
Weighing in at 5 lbs., the FP-740TLI impact wrench is powered by a
high-energy six-vane 8,500 rpm motor, and features a 2” extended drive and
through-handle exhaust.