Mayhew Tools Introduces Spark Plug Thread Chaser

Mayhew Tools Introduces Spark Plug Thread Chaser

The Spark Plug Thread Chaser, part No. 37900, is made in USA and is backed by a lifetime warranty.

Mayhew Steel Products, Inc. (Mayhew Tools) introduces a new spark plug thread chaser, designed to clean and restore spark plug holes. The dual ended tool offers two distinct chasers: one 14mm x 1.25mm and the other 18mm x 1.5mm. By placing the spark plug thread chaser into the impacted area and using a 3/16” ratchet or deep socket, users can effectively engage with the threads to clean and restore them.

The spark plug thread chaser, part No. 37900, also features a rubber O-ring, preventing unnecessary slippage and ensuring correct alignment while in use. A black nitride finish helps prevent rust and provides corrosion and abrasion resistance. Made in the USA and backed by a Lifetime Warranty.

Mayhew Tools are sold through an extensive network of global distributors, primarily serving the industrial, automotive, and hardware markets. For more information, contact Mayhew Tools at 800.872.0037 or visit mayhew.com.

Mayhew Tools
Phone: 800-872-0037Fax: 413-863-8464Contact: Debra Selicious

You May Also Like

AMD-035 Membrane Dryer Provides Ultra-Clean & Ultra Dry Air

The dryer has a flow rating of 35 SCFM and maximum working pressures of 150 PSI.

According to Walmec North America, the WNA AMD-035 Membrane dryer has a 4-stage pre-filtration that is critical to the longevity and function of the membrane dryer.

The first and second stage filters remove moisture, liquids, dust, rust, scale, and other contaminants to 5 microns.  An automatic float drain under the second stage filter opens and expels all collected liquids whenever an ounce or more is present.  It is fully automatic with no continuous air loss.  The third and fourth stages remove any remaining particles down to .01 microns as well as absorbing any remaining moisture or oil vapors.  The Membrane Dryer lowers the humidity level by venting it harmlessly into the surrounding atmosphere.  A flexible input hose assembly eliminates the hazards of damage from vibrations in piped compressed air systems and allows the Membrane Dryer itself, to be installed in any position. 

New Rislone ‘DEF Crystal Clean’ Clears P20EE Codes

New Rislone DEF Crystal Clean Diesel DEF & SCR Emissions System Cleaner scrubs away crystal contaminants from the selective catalytic reduction (SCR) systems of diesel cars, trucks, and SUVs to cost-effectively restore power and performance.

New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits

Ford Power Stroke 6.7L & GM Duramax 6.6L ProKits easily remove compression seals and shorten repair times

AMSOIL Introduces New OE 0W-40 100% Synthetic Motor Oil

The new OE 0W-40 is primarily for newer RAM HD trucks equipped with the 6.4-liter Hemi engine.

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

Other Posts

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.