Milwaukee Delivers 15A Portable Power to their M18 System

Milwaukee Delivers 15A Portable Power to their M18 System

The M18 CARRY-ON 3600W/1800W Power Supply provides the most versatile 15A power with less hassle.  

Milwaukee Tool expands their CARRY-ON Power Supply solutions to their M18 System to bring on-demand portable power to any job site. The M18 CARRY-ON 3600W/1800W Power Supply provides the most versatile 15A power with less hassle.  

The push button delivers an instantaneous start, reaching 3600 starting watts/1800 running watts of pure sine wave energy to power everything from high demanding 15A tools to sensitive electronics. The M18 CARRY-ON 3600W/1800W Power Supply delivers longer sustained peak power through the most aggressive applications, such as table saws and pipe threading.  

The M18 CARRY-ON 3600W/1800W Power Supply leverages four M18 batteries to deliver emissions-free power to the job site while eliminating the hassles associated with gas, such as headaches and routine maintenance. Quiet operation and a compact form allow users to carry the CARRY-ON Power Supply in confined spaces, scissor lifts and utility carts.  

Compatible with a shoulder strap (sold separately), the lightweight and compact design delivers maximum portability to allow users to bring power wherever it’s needed on the jobsite. Users no longer have to rely on gas or temporary power sources. As an added benefit, the CARRY-ON Power Supply features USB-C PD and USB-A ports to charge sensitive electronic devices faster.  

To meet performance expectations and deliver maximum power, the M18 CARRY-ON 3600W/1800W Power Supply requires four M18 REDLITHIUM batteries to operate. Users can charge M18 Batteries simultaneously at a 3A standard rate when the product is not in discharge mode. The CARRY-ON Power Supply also features lockable battery bays, where batteries can be secured with a padlock (not included) to prevent battery theft on the job site. 

Milwaukee is committed to improving productivity by providing performance-driven and trade-focused solutions so users can perform an entire day’s work on one battery system. The new M18 CARRY-ON 3600W/1800W Power Supply is fully compatible with the entire M18 line, now offering more than 250 power tool solutions. 

You May Also Like

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

The new BendPak SP-7XE Series of full-rise scissor lifts provides the performance and undercarriage access of traditional two-post lifts in a more compact, space-saving package. Floor- and flush-mount (SP-7XEF) models of this frame-engaging lift are available. 

With a rated capacity of 7,000 pounds, SP-7XE Series lifts are designed for full-service auto shops, quick-lube pits, and any other service area with little room to spare. They can raise most passenger vehicles and light trucks nearly six feet, so techs can easily access all critical undercarriage areas without having to stoop or crawl across the floor. They fold flat when not in use. 

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.

Other Posts

Snap-on Debuts New General Service Set 

The company says technicians now have maximized tool concentration in the smallest footprint.

Chevron Introduces New Rykon Formula to Grease Product Line

The new calcium sulfonate complex-based grease is designed for heavy-duty and extreme pressure applications.

New Small Stud Extractor Now Available from Mayhew Tools

This new stud extractor, 1/4″ drive, allows for stud and bolt removal from tighter spaces with a wide option of driver abilities for job versatility.

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread