Mohawk Introduces the TP-26 Lift

Mohawk Introduces the TP-26 Lift

Mohawk Lift's TP-26 is the first two-post, frame contact lift made to suit the needs of heavy-duty fleets, with an above ground style two-post lift. Installation of the lifts consists of just bolting the lifts columns to the concrete floor of the shop, and is completed in just five hours.

Mohawk Lift’s TP-26 is the first two-post, frame contact lift made to suit the needs of heavy-duty fleets, with an above ground style two-post lift. Installation of the lifts consists of just bolting the lifts columns to the concrete floor of the shop, and is completed in just five hours.

With a full six-foot lifting height, the TP-26 model offer infinite position mechanical locking safeties in both columns, backed by Mohawk’s patented hydraulic locking system. Surface-mounted design and operation of the TP-26 avoids the environmental liabilities associated with in ground lifts.

Clear floor work area between the lifting columns allows tool boxes and shop equipment to easily roll around the shop.

Mohawk Lifts TP-26 also comes with a 25-year structural and 10-year mechanical warranty.

For additional information, visit www.mohawklifts.com or call (800) 833-2006, or fax us at (518) 842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

You May Also Like

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

The new BendPak SP-7XE Series of full-rise scissor lifts provides the performance and undercarriage access of traditional two-post lifts in a more compact, space-saving package. Floor- and flush-mount (SP-7XEF) models of this frame-engaging lift are available. 

With a rated capacity of 7,000 pounds, SP-7XE Series lifts are designed for full-service auto shops, quick-lube pits, and any other service area with little room to spare. They can raise most passenger vehicles and light trucks nearly six feet, so techs can easily access all critical undercarriage areas without having to stoop or crawl across the floor. They fold flat when not in use. 

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.

Other Posts

Snap-on Debuts New General Service Set 

The company says technicians now have maximized tool concentration in the smallest footprint.

Chevron Introduces New Rykon Formula to Grease Product Line

The new calcium sulfonate complex-based grease is designed for heavy-duty and extreme pressure applications.

New Small Stud Extractor Now Available from Mayhew Tools

This new stud extractor, 1/4″ drive, allows for stud and bolt removal from tighter spaces with a wide option of driver abilities for job versatility.

6250 1⁄4” Mini Rt. Angle Die Grinder

The low weight ultra-compact design provides added control and maneuverability.