New BG Biodiesel Fuel Conditioner Makes Biodiesel Palatable

New BG Biodiesel Fuel Conditioner Makes Biodiesel Palatable

With diesel fuel prices at historic highs, desperate drivers are scrambling to find ways to stay on the road. They are pouring transmission fluids, used solvents, suntan lotions, anything they can find into their tank to lower fuel costs. The hottest new hope is biodiesel, a general term given to non-petroleum fuel produced from renewable resources, such as animal ....

With diesel fuel prices at historic highs, desperate drivers are scrambling to find ways to stay on the road.

They are pouring transmission fluids, used solvents, suntan lotions, anything they can find into their tank to lower fuel costs, says Mike Belluomo, BG’s product technical services manager.

Would you like fries with that?
The hottest new hope is biodiesel, a general term given to non-petroleum fuel produced from renewable resources, such as animal fats and vegetable oils. The Consumer Energy Council of America says that in the U.S., roughly half of biodiesel production uses soybean oil, and most of the remaining half is recycled from restaurants’ cooking oil. In fact, restaurant owners have to lock up their waste fry grease to protect it from thieves.

Biodiesel Fries
But, Belluomo says, biodiesel must be chemically treated because it attracts moisture; which can degrade fuel and cause microbial growth. It can also oxidize in storage. And it can plug fuel filters and injectors, which has been a major problem, when the glycerin that is supposed to be stripped out in refining isn’t. This can cause catastrophic fuel system failure. It’s like bacon grease solidifying in the skillet. Imagine trying to run that bacon grease through a fuel filter and pump.

Do you know what’s in your tank?
A problem with switching to biodiesel, Belluomo says, is that even though most biodiesel fuels meet the standards of the American Society of Testing Materials, www.astm.org, the user can’t be assured that it wasn’t distilled in someone’s backyard and sold as the real stuff.

“Unfortunately, we have seen a lot of people collecting used cooking oil and grease from restaurants and using it to make biodiesel in their garages or sheds. Biodiesel ‘kits’ can be purchased easily on the Internet along with instructions for the production process. Set it up and you are now a fuel producer.”

Biodiesel has its good points and its not-so-good points. It produces lower emissions, is renewable and can be sent through existing fuel lines (www.solarhome.org).

Belluomo points out some of the advantages and disadvantages of biodiesel:

Advantages:
• Improves engine lubricity;
• Reduces dependency on petroleum-based fuel;
• Contains oxygen, which should burn more completely;
• Contributes to our domestic economy;
• Renewable feedstocks;
• Sulfur-free; and
• Biodegradable.

Disadvantages:
• Expensive to manufacture;
• Poor cold temperature properties;
• Storage stability issues — may observe possible fuel separation in biodiesel/petroleum diesel blends;
• Lower oxidative stability vs. petroleum diesel;
• May be incompatible with older engine components, especially elastomers (o-rings/gaskets);
• High moisture attraction — may cause corrosion, fuel stratification or promote microbial growth;
• May promote fuel filter plugging; and
• Heat energy (BTU) value is lower than petroleum diesel, which may result in decreased power output and/or fuel economy.

There’s a solution!
With more than 250 million gallons of biodiesel sold in the U.S., the need for a fuel conditioner is greater than ever. That’s why BG is introducing BG Biodiesel Fuel Conditioner, Part No. 240. It’s a versatile fuel supplement formulated to stabilize and protect diesel engines against moisture contamination and corrosion which can cause microbial growth. It also reduces the risk of fuel gelling in cold temperatures; so it won’t plug up fuel filters and pumps.

“BG Biodiesel Fuel Conditioner is BG’s response to the major deficiencies of biodiesel,” Belluomo says. “We’re one of the few companies with an additive specifically for biodiesel and ours is the best solution on the market!”

For information on products offered by BG Products, Inc., visit www.bgprod.com.

You May Also Like

Pulling Codes: Multiple Misfire Personalities

A vehicle fails an emission test due to a series of codes, with misfire activity found on cylinders 2, 4, 6, 8 and 3 – and a strange metallic sound can be heard when the rpms are raised. See how Carlton Banks solves this latest Pulling Codes case.

A Story of Codes P0302, 04, 06, 08 & 03
 

This month’s diagnostic journey begins with a 2008 Land Rover Discovery that is taken in to a local testing facility for an emission test and fails due to a series of misfire codes.

Misfire activity is found on cylinders 2, 4, 6, 8 and 3; at first glance this series of codes implies that there may be bank 2 issues, but the cylinder 3 code throws a wrench into that mode of thought.

Using Volumetric Efficiency to Determine the Health of an Engine

Using an OBD II scan tool/dynamometer simulation/calculation program that can graph volumetric efficiency (VE) over rpms, contributor Glen Beanard devised a test sequence using real-world vehicles. This article takes you step by step through his diagnostic process.

Intermittent Engine Misfire Analysis

Even for an experienced diagnostic technician, attempting to diagnose an intermittent misfire condition that occurs only under specific driving conditions can be a frustrating exercise. Contributor Gary Goms breaks it down, and includes tips for using a scan tool and a lab scope.

5 Mistakes Newbie Tire Techs Make

Nothing can turn a new tech into a veteran but time and experience, and often that experience is going to come from making mistakes – sometimes real bad ones – and learning from them (you hope). By addressing these most common mistakes right away with new tire techs, the worst of them can be avoided.

Rivet Bonding Comes Full Blast

Now that rivet bonding is in the mainstream with the Ford F-150, it’s time for shops to look into training and equipment for this repair process.

Other Posts

‘Test Before Touch’ – It’s No Waste of Time

To help reduce the headaches involved in servicing TPMS, it’s important to use the “Test Before Touch” procedures in your shop. Used properly, TBT can form a strong foundation for everything else you do regarding TPMS, reduce complexity and help you educate and keep your customers.

The Right Diagnostic Tools Save You From Extensive Disassembly Time

It can sometimes be difficult to make the correct diagnosis for a hard-to-start complaint. And diagnostic time may be extensive — and expensive. This article shows how certain tools have the ability to automatically analyze waveforms for you.

Know the Specs for Your Social Media Accounts

If you’re doing social media, are you doing it effectively? Are your accounts set up correctly? Are you posting often enough? Mark Claypool answers some questions.

Top 5 Tools: Kenny Younkins, Ken’s Auto Service Center

Kenny Younkins, owner Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits Ken’s Auto Service Center Akron, OH While Ken first said his favorite tool is his fishing rod, he said in the shop he prefers these five: