OTC Releases Powertrain Lift with 2,500-lb. Capacity

OTC Releases Powertrain Lift with 2,500-lb. Capacity

For precise and safe lifting of powertrain components.

OTC announced the release of the new 2,500-lb. Air/Hydraulic Powertrain Lift (1595A) to lift and handle heavy loads for technicians, reducing stress and heavy lifting on the job. The 1595A powertrain lift can handle loads up to 2,500-lbs. and can easily maneuver around a shop on its large casters.

The scissor-designed powertrain lift can handle loads including heavy engine and transmission assemblies, gas tanks, drive axle assemblies, electric vehicle batteries and more. Using the new air/hydraulic foot pump, technicians can accurately lift heavy items where each needs to be on a vehicle.

In addition to precise raising and lowering, the table of the lift is adaptable from independent adjusting screws, capable of tilting the table 15 degrees side-to-side or fore-and-aft, allowing full range of motion to remove or install heavy items. The lift’s large, 8-in. swivel casters can accommodate the load capacity with ease and allow the technician to move the lift around the shop. The 2,500-lb. Air/Hydraulic Powertrain Lift meets ASME PASE standards. 

For more information on the 1595A and all OTC tools and equipment, visit www.otctools.com.

You May Also Like

CEMB Debuts 2-Hit Balancer at SEMA 2022

CEMB said its 2-hit balancer no longer uses an automatic gauge, which eliminates the need for periodic maintenance.

By Madeleine Winer, editor of Tire Review

CEMB USA debuted its new 2-hit wheel balancer at this year’s SEMA Show, which aims to simplify wheel balancing, especially for entry-level technicians. The new balancer uses a two-hit method on the tire to confirm wheel dimensions and send the data to the wheel balancer.

Hunter’s Bench Lathes Now Feature HunterNet 2

With the new connectivity, shop owners will be able to view before and after-cut results for rotors and drums online.

Hunter Engineering BL Series of bench lathes with tablets now also connects with the HunterNet 2 portal.
New Line of Rotary Fully Automatic A/C Recharging Machines

The new line provides technicians with a cost-effective way to recover, recycle and recharge R134a and R1234yf.

ESAB Launches Battery-Powered Stick/TIG Welder

The Renegade VOLT ES 200i is powered by four DEWALT FLEXVOLT batteries.

Hunter Engineering’s New Maverick Tire Changer

An all-new leverless head utilizes a Revolution-style tool and hook mechanism for maximum wheel protection.

Hunter Engineering Maverick tire changer

Other Posts

OTC Debuts New Hub Oil Seal Puller Set

OTC’s new tools are designed to remove hub oil seals on both foreign and domestic trailer and truck axles in one piece, without damage.

OTC has released a new heavy-duty hub oil seal puller set to support technicians in trailer and truck repairs of multiple sizes.
Pull Frozen Hubs with OTC Universal Hub Puller Tool

The tool’s adjustable sliding puller legs can be positioned anywhere on the puller center hub for a true universal fit.

OTC Releases New Clutch Alignment Tool Set 

This set is designed to properly align single disc clutches on both foreign and domestic cars and trucks.

Snap-on Lights the Way

Snap-on lights provide techs illumination in dark spaces.