Head Gasket Replacement
During some point in their service lives, most import engines built with cast-iron cylinder blocks and aluminum cylinder heads will need a cylinder head gasket replacement. The vulnerability of aluminum-head engines to head gasket failure is caused by the aluminum cylinder head expanding approximately 1.5 times more than the cast-iron block. Although measured in thousandths
A/C Update
Once a year the Mobile Air Conditioning Society (MACS) hosts a trade show for A/C shop owners and technicians. This year’s event was held in Orlando, FL, January 22-24, and provided a wealth of service information to those who attended the technical sessions. For those who could not be there, we pass along some of
Belts and Hose Inspectionscan Lead to Profitable Add-On Sales
Accessory drive belts and coolant hose replacements are perhaps the most popular and lucrative add-on services in the independent import shop. Because belt and hose inspections are included in auto manufacturers’ scheduled maintenance charts, service writers at most well-managed shops recommend a belt and hose inspection along with tuneup, oil change, starting, charging, cooling, air
Rev Up Volvo Performance
When any engine swap is done using a larger displacement engine, you have to look at the big picture. Everything around it must be addressed to handle the added horsepower. This includes the braking system, front and rear suspension, and the structure of the frame. When I did my first Volvo V8 engine swap, it
Driveability Series: Ford Water Pumps
An owner of a Ford vehicle is at your shop to have an oil and filter change. During the service, you notice a little coolant is leaking from the vehicle’s water pump. So, do you replace the pump or is a little coolant dripping normal? Well, the answer depends on how much coolant the pump
Volkswagen Underhood Maintenance & Service Tips
Volkswagens have always been maintenance friendly. From the very first models, ease of repair and durability have been built into the design. VW has managed to keep basic maintenance procedures relatively uncomplicated throughout the years. In this article, I’ll cover some of the more common underhood procedures on common VW models and include some tips
Cooling Off: Cooling System Parts and Service
Cooling system service is an absolute “must-do” on any import nameplate. Once a cooling system suffers long-term neglect, it turns into an on-going source of problems for the owner and his servicing technician because, when corrosion starts to take place, the effects can’t be reversed. For that single reason, it’s important to sell your customers