Redline Detection is unveiling a new technology
called PowerSmoke PRO at AAPEX. The PowerSmoke PRO replicates the
full load of a turbo, supercharged or boosted engine so the entire system can
be safely tested for faults with the engine off. According to the company, it
is the only diagnostic leak detector available today that can, in a single
procedure, reliably detect any high-pressure leak, pinpoint its exact location
and precisely identify failing components. This technology was originally
developed in collaboration with OEMs to provide dealership technicians a
much-needed tool to effectively serve the growing category of boosted vehicles.
PowerSmoke PRO now makes this technology available to the aftermarket. It will
be on display at Redline Detection’s booth (1661) at AAPEX Nov. 5-7.
“As
OEMs increasingly use forced-induction, boosted and turbo systems to provide
consumers with improved fuel economy without sacrificing performance,
technicians are in desperate need of diagnostic equipment to quickly and safely
diagnose issues on these vehicles,” said Alex Parker, executive vice president for Redline
Detection. “PowerSmoke PRO is the only technology available that can deliver
variable pressure, high-density vapor that is 100% free of dyes and other
contaminants, through the 20 psi range.”
This
groundbreaking technology delivers six times the volume and more than 40 times
the pressure of a traditional EVAP smoke machine and effectively replicates the
entire stress/boost of a running engine with the engine safely off. This allows
technicians to duplicate driveability issues right in the service center,
eliminating the need for diagnostic test drives and dramatically saving time
and improving efficiency in diagnosing repairs.
Another
unique feature of PowerSmoke PRO is its highly visible vapor, which is
completely free of dyes and other contaminants. Some OEMs prohibit or recommend
against the use of UV dye in leak detection diagnostics as it can coat sensors
and void manufacturer warranties. PowerSmoke PRO drastically reduces diagnostic
time on turbo and boosted vehicles.
In
addition to being contaminant free, Redline Detection’s PowerSmoke PRO offers
the following features:
- Specifically for boosted engines;
- Variable pressure | variable flow;
- Pressure up to 40x typical EVAP;
- Compact, rugged design;
- Professional-grade strong;
- Made with steel and billet aluminum;
- Runs on compressed air;
- Powered by 110-250V AC or 12V DC;
- Free of dyes and contaminants;
- 3-20 psi range;
- Performs decay/leak down tests; and
- Weighs only 19 lbs.
To
learn more about Redline Detection, visit www.redlinedetection.com or visit booth number
1661 at AAPEX 2013.