Steck’s Axle Popper Helps Break Loose Stubborn Half Shafts
Connect with us
Close Sidebar Panel Open Sidebar Panel

Products

Steck’s Axle Popper Helps Break Loose Stubborn Half Shafts

Break loose half shafts from transaxles on FWD cars using your air hammer with Steck’s Axle Popper II. Safer than using a pry bar, the Axle Popper II’s wedge-forked end applies even pressure to both sides of the shaft for sure release of the shaft.

Advertisement

Axle Popper II ActionSteck Manufacturing Company has released the Axle Popper (P/N 71415).

Click Here to Read More
Advertisement

Break loose half shafts from transaxles on FWD cars using your air hammer. Axle Popper II is Steck’s air tool version of its original Axle Popper Wedge (71411).

Like the wedge, the Axle Popper II is tapered on both ends of the wedge along with a 6” shaft to fit into your air hammer. The base of the Axle Popper II has been increased by 3/8” to give it additional strength while decreasing potential deflection with the increased power of your air hammer.

Safer than using a pry bar, the Axle Popper II wedge-forked end applies even pressure to both sides of the shaft for sure release of the shaft. The original Axle Popper Shim (71412), which is sold separately, can also be used with the Axle Popper II to fill the gap between the half shaft and the transaxle on some vehicles.

Visit www.steckmfg.com.Axle Popper II Native

Advertisement
Click to comment
Connect
Tech Shop Magazine