The Equipment and Tool Institute Announces 2013-’14 Officers and New Directors

The Equipment and Tool Institute Announces 2013-’14 Officers and New Directors

ETI announces the new officers and board members on their election to office for 2013-’14.

Officers (one-year term)
President – Ben Johnson (Mitchell 1)
Vice President, Programs – Neil Davis (Snap-on Diagnostics)
Vice President, Marketing – Tim Morgan (Spanesi Americas, Inc.)
Secretary/Treasurer – Bob Holland (Chief Automotive Technologies)
Immediate Past President – Dan Brass (Bosch Automotive Service Solutions)

Directors
Elected to fill open and expired board seats to a three-year term:

Term expiring in 2016
Greg Potter (DG Technologies)
Jim Fish (Bosch Automotive Service Solutions)
Brian Herron (Drew Technologies)

Open seat expiring in 2015
Kathy Kedzior (MAHLE Powertrain, LLC)

Rounding out the Board of Directors completing terms previous elected to are:
Term expiring in 2014
David Rich (INNOVA Electronics) (Technical Director)
Dennis Keane (Bosch Automotive Service Solutions)
Jeff Murphy (Mahle RTI)

Term expiring in 2015
Robert Vogt (IOSiX, LLC)
Zachary Parker (Redline Detection)

Founded in 1947, the Equipment and Tool Institute is a trade association of automotive tool and equipment manufacturers and technical information providers. ETI’s mission is to: Advance the vehicle service industry by providing technical data and open dialog between the manufacturers of transportation products, government regulators and the providers of tools, equipment and service information.

For more details about ETI programs and activities, contact Jessie Korosec, marketing manager, Equipment and Tool Institute, P.O. Box 82146, Rochester, MI 48308. Phone: 248-656-5085; e-mail: [email protected].

You May Also Like

Registration Open for ETI ToolTech 2024

The event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

The Equipment & Tool Institute's (ETI) Mission is to advance the vehicle service industry by providing technical data and open dialog between the manufacturers of transportation products, government regulators and the providers of tools, equipment, and service information. 

This mission is put into action at the annual ETI ToolTech event. This year, the event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

Scan Tools: Solving the Diagnostic Puzzle

“The fact is, the most expensive tool may not be the best tool for you. It depends on what vehicles you work on and what you want out of the tool.” – Dwayne Myers, Dynamic Automotive, Frederick, MD Related Articles – ISN’s Annual Tool Dealer Expo Gives Attendees Sneak Peek at New Products – Editor’s

ISN’s Annual Tool Dealer Expo Gives Attendees Sneak Peek at New Products

The TechShop team and more than 3,500 attendees from around the world recently joined Integrated Supply Network (ISN) at its 14th annual Tool Dealer Expo June 24-25 in Orlando, FL. There, suppliers launched new products and gave away more than $2 million in cash and prizes throughout the weekend event. Related Articles – Beyond the

Editor’s Notes: ‘The Rising Tide Lifts All Boats’

For the past year and a half, in addition to being editor of TechShop, I’ve also carried the role as editor of our student publication Tomorrow’s Tech, which is delivered to NATEF-certified automotive technical programs throughout the U.S. With this responsibility, I’m keenly aware of the industry’s need for the next generation of automotive service

Make Aluminum Welding Easier with Cebotech’s MIG Welders

All three of Cebotech’s MIG welders (models 301, 302 and 322) were designed to make aluminum welding easier. Related Articles – AMD-035 Membrane Dryer Provides Ultra-Clean & Ultra Dry Air – New Rislone ‘DEF Crystal Clean’ Clears P20EE Codes – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits They’re supplied with built-in welding programs for easy setup, and

Other Posts

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

ISN Expands Freedom Program for Mobile Tool Dealers

ISN’s Freedom Program is designed to provide experienced, successful mobile tool dealers with support to become an independent mobile dealer and expand their growth.

Snap-on Continues to Offer Free Weekly Product Training Sessions

The online training and question and answer sessions are free of charge.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.