Tracer Products Creates Tamper-Evident Sleeves To Prevent Refrigerant Cross-Contamination In Automotive A/C Systems

Tracer Products Creates Tamper-Evident Sleeves To Prevent Refrigerant Cross-Contamination In Automotive A/C Systems

Tracer Products has introduced Tracerline TP-30 Tamper-Evident Sleeves, specially designed to prevent refrigerant cross-contamination in automotive A/C systems and recovery equipment. Using the sleeves is a win-win situation for both the vehicle owner and the service technician, according to Tracerline.


Tracer Products has introduced Tracerline TP-30 Tamper-Evident Sleeves,
specially designed to prevent refrigerant cross-contamination in automotive A/C
systems and recovery equipment.
 
Using the sleeves is a win-win situation for both the vehicle owner and the
service technician, according to Tracerline. For the owner, the sleeves ensure
that the A/C system hasn’t been contaminated with a foreign refrigerant, which
can affect system performance and longevity. For the technician, the sleeves
protect his reputation, while guarding against unqualified repairs and costly
comebacks.
 
Tamper-evident sleeves are easy to install. Simply slip one sleeve onto each
service port, then heat shrink the sleeves with a hot air gun. The sleeves are
now sealed tightly against the service ports. To complete the installation,
just apply the label provided and record the unique serial number found on the
sleeve.
 
The tamper-evident sleeves come in a convenient storage bag complete with 10
sleeves with serial numbers, matching labels and heat-activated tape.
 
For more information about the Tracerline TP-30 Tamper-Evident Sleeves, call
1-800-641-1133. Outside the United States and Canada, call 516-333-1254.

You May Also Like

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

The new BendPak SP-7XE Series of full-rise scissor lifts provides the performance and undercarriage access of traditional two-post lifts in a more compact, space-saving package. Floor- and flush-mount (SP-7XEF) models of this frame-engaging lift are available. 

With a rated capacity of 7,000 pounds, SP-7XE Series lifts are designed for full-service auto shops, quick-lube pits, and any other service area with little room to spare. They can raise most passenger vehicles and light trucks nearly six feet, so techs can easily access all critical undercarriage areas without having to stoop or crawl across the floor. They fold flat when not in use. 

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.

Other Posts

Snap-on Debuts New General Service Set 

The company says technicians now have maximized tool concentration in the smallest footprint.

Chevron Introduces New Rykon Formula to Grease Product Line

The new calcium sulfonate complex-based grease is designed for heavy-duty and extreme pressure applications.

New Small Stud Extractor Now Available from Mayhew Tools

This new stud extractor, 1/4″ drive, allows for stud and bolt removal from tighter spaces with a wide option of driver abilities for job versatility.

6250 1⁄4” Mini Rt. Angle Die Grinder

The low weight ultra-compact design provides added control and maneuverability.