Tracer Products Introduces J2791-Certified Refrigerant Leak Detector

Tracer Products Introduces J2791-Certified Refrigerant Leak Detector

Tracer Products has unveiled the TP-9364 PRO-Alert 2791, an electronic refrigerant leak detector that is certified to meet the new SAE J2791 standard.

Tracer Products has unveiled the TP-9364 PRO-Alert 2791, an electronic
refrigerant leak detector that is certified to meet the new SAE J2791 standard.
It utilizes a state-of-the-art infrared sensor to accurately detect refrigerant
leaks down to 0.1oz/year (3 g/year). A three-position sensitivity switch
minimizes false triggering and allows for easy diagnosis of small, medium and
large leaks. The unit is sensitive to R-12, R-134a, R-1234yf and all other HFC
refrigerants.

Unlike heated sensors on competitors’ units, the
PRO-Alert 2791’s infrared sensor offers consistent response throughout its
life. In addition, it will not become contaminated by exposure to large amounts
of refrigerant. Sensor life is an incredible 1,000 hours or more! The unit’s
high-efficiency air sampling pump provides quicker response and quicker
clearing ("zeroing"). A rubber-coated, flexible metal probe slithers
easily into tight places and holds its position. An audible alarm and multiple
LEDs help locate leaks fast!

The PRO-Alert 2791 is powered by a rechargeable NiMH
battery, which provides over six hours of use between charges. On-board
diagnostics indicate charging status, and alert the user to low battery or
infrared sensor failure. The unit can also be used with an AC power adapter and
a 12 VDC power adapter with cigarette lighter plug (included). All components
are packed in a rugged plastic carrying case. The AC adapter is available in
120V, 230V, 240V and 100V versions.

For more information about the Tracerline TP-9364 PRO-Alert 2791 Electronic
Refrigerant Leak Detector, call toll-free 1-800-641-1133. Outside the
United States and Canada, call 516-333-1254. Website www.tracerline.com.

You May Also Like

New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits

Ford Power Stroke 6.7L & GM Duramax 6.6L ProKits easily remove compression seals and shorten repair times

ProMAXX Tool introduces the Ford Power Stroke 6.7L Fuel Injector Copper Compression Seal Puller and Seal Saver ProKit (PMXISPS200PRO). The tool is designed to empower technicians to quickly remove seals from the head effortlessly and securely. In the coming months, a GM 6.6L Duramax Compression Seal Puller/Saver version will be available.

AMSOIL Introduces New OE 0W-40 100% Synthetic Motor Oil

The new OE 0W-40 is primarily for newer RAM HD trucks equipped with the 6.4-liter Hemi engine.

BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

Other Posts

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.

Snap-on Debuts New General Service Set 

The company says technicians now have maximized tool concentration in the smallest footprint.

Chevron Introduces New Rykon Formula to Grease Product Line

The new calcium sulfonate complex-based grease is designed for heavy-duty and extreme pressure applications.