Tire Measuring Process More Complicated Than It Sounds

Tire Measuring Process More Complicated Than It Sounds

Prior to every NHRA national event, Goodyear's tire supply and a group of technicians arrive at the track two days before the racing starts. They set up the Goodyear area - the mounting equipment, balancing equipment and various tools - around the Goodyear haulers and open for business.

It happens before every NHRA national drag racing event but few people ever see it.

The work is completed before teams arrive at the race track, but those teams would sure know if the work was not done.

It is the first step toward a key part of tuning the chassis to the racing conditions and yet you never hear about it.

“Our guys get there early and they do a lot of work before the teams or fans ever see them,” said Goodyear’s Bryce Jones.

Prior to every NHRA national event, Goodyear’s tire supply and a group of technicians arrive at the track two days before the racing starts. They set up the Goodyear area – the mounting equipment, balancing equipment and various tools – around the Goodyear haulers and open for business.

That’s when they begin the crucial work with the D2681 tires used by NHRA Top Fuel and Funny Car teams. Goodyear technicians inflate the tires to 20 psi on an inflation stand that does not require the tires to be mounted on a wheel. Then the technicians leave the tire at 20 psi for 60 seconds before lowering the pressure down to seven psi.

With the pressure lowered, a Goodyear tech will measure the circumference of the tire and note it with a special crayon-like marker before letting the remaining air out of the tire, removing the tire from the inflation stand and returning the tire to the hauler.

The variable nature of the bias-ply tire means that teams will have a range of sizes to choose from around the typical 115-inch circumference. That range is sometimes as small as 113 inches and sometimes as large as 118 inches. Some teams prefer what are called ‘short’ tires (those with a marginally smaller circumference) while others look for so-called ‘big’ tires. The choice is predicated upon chassis tuning decisions made by individual teams.

A quarter of an inch, even an eighth of an inch, can make a significant difference in the tuning of the engine, clutch and chassis. The tire specialists for the teams are very particular about tire selection.

Dan Kissling, of Competition Tire East, said, “We do this to all the Top Fuel and Funny Car tires, approximately 200, on Tuesday and Wednesday before the race.”

The work is heavy, exacting labor. The technical knowledge and trackside experience that Kissling and others like him put to effect help drag racing teams get the best use out of their tires.

The process is an example of the hidden work that goes into Goodyear’s position as the exclusive tire provider for the NHRA’s Top Fuel, Funny Car and Pro Stock categories.            

           

You May Also Like

AACF Launches 65th Anniversary Fundraising Initiative

The campaign aims to raise $65,000 through 1,000 donations of $65 each.

The Automotive Aftermarket Charitable Foundation (AACF) announced the launch of its 65th-anniversary fundraising initiative. Running through July 1, 2024, the campaign aims to raise $65,000 through 1,000 donations of $65 each. This impactful effort highlights the industry's commitment to taking care of its own, the AACF said. 

From sudden illness and death to natural disasters, the foundation has provided assistance to industry professionals and their families during their darkest hours. As AACF celebrates its 65th year of service, it remains steadfast in its mission to provide financial support and resources to those in the automotive aftermarket industry in need, the organization said.

Cordless vs. Pneumatic: The Battle Continues

What does the future hold? Will one gain the upper hand over time?

Red and Blue toy robots boxing
TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion
Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread

Other Posts

BendPak Founder Don Henthorn Passes Away

Grew company from small machine shop to global leader in car lifts and garage equipment.

TOPDON USA Makes $25,000 Donation to TechForce Foundation

To date, TOPDON has donated over $66,000 to aid organizations and schools that are dedicated to preparing the next generation of auto technicians around the world.  

Registration Open for ETI ToolTech 2024

The event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.