EPA To Propose Eliminating Use Of 134a In Vehicles, Consumer Products

EPA To Propose Eliminating Use Of 134a In Vehicles, Consumer Products

According to the agency, a proposed rule will be issued this summer to withdraw approval for 134a for use in new motor vehicles and as an aerosol in consumer products. EPA pointed to the availability of substitutes for 134a in both motor vehicles and consumer products including 1234yf, which was approved under SNAP for use on vehicles.

From AAIA Capital Report

WASHINGTON, D.C. – The U.S. Environmental Protection Agency (EPA) announced on Tuesday, Feb. 4 that it will soon issue a proposed rule that would eliminate the use of 134a as a refrigerant in new motor vehicles and as an aerosol in many consumer products. The action will be taken under the Significant New Alternatives Program (SNAP), which was established under the 1990 Clean Air Act Amendments to evaluate the human health and environmental impact of substitutes for ozone-depleting substances that have been phased out of production. The agency is taking this action as part of the President Climate Action Plan, which aims to develop an “all-of-the-above” strategy for reducing emissions of greenhouse gases in the U.S.

According to the agency, a proposed rule will be issued this summer to withdraw approval for 134a for use in new motor vehicles and as an aerosol in consumer products. EPA pointed to the availability of substitutes for 134a in both motor vehicles and consumer products including 1234yf, which was approved under SNAP for use on vehicles. EPA did clarify that the upcoming action will not impact the use of 134a in the servicing of motor vehicles already on the road. As part of the announcement, EPA did not specify a timeline for ending use of 134a, but stated that such action would be determined based on each specified use case.

You May Also Like

Registration Open for ETI ToolTech 2024

The event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

The Equipment & Tool Institute's (ETI) Mission is to advance the vehicle service industry by providing technical data and open dialog between the manufacturers of transportation products, government regulators and the providers of tools, equipment, and service information. 

This mission is put into action at the annual ETI ToolTech event. This year, the event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion
Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool

Other Posts

New Snap-on Limited Edition Speed Demon Roll Cab

Features include next-level organization, durability, security, mobility and exclusive Speed Demon emblem.

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

ISN Expands Freedom Program for Mobile Tool Dealers

ISN’s Freedom Program is designed to provide experienced, successful mobile tool dealers with support to become an independent mobile dealer and expand their growth.

Snap-on Continues to Offer Free Weekly Product Training Sessions

The online training and question and answer sessions are free of charge.