Tech Tip: Rattle Noise at Cold Engine Start on Nissan Vehicles

Tech Tip: Rattle Noise at Cold Engine Start on Nissan Vehicles

If you confirm that the valve lifters make a rattle/clatter noise for two to three seconds when the engine is started cold on Nissan vehicles with VG30E or VG33E engine built before Oct. 13, 2003, replace the valve lifters, P/N 13231-V5005 (quantity 12).

If you confirm that the valve lifters make a rattle/clatter noise for two to three seconds when the engine is started cold on Nissan vehicles with VG30E or VG33E engine built before Oct. 13, 2003, replace the valve lifters, P/N 13231-V5005 (quantity 12).

Note:
To duplicate this incident, the engine usually requires an overnight “cold-soak.” You should hear the noise coming from one or both valve covers. A moderate amount of engine noise that may occur during starting or during the time needed for oil pressure to build (about one second) is considered normal, and doesn’t require repair.

Go to the EM section of the appropriate service manual for lifter replacement instructions.

Technical service bulletin courtesy of IDENTIFIX.

For additional tech tips, visit www.identifix.com.

You May Also Like

#6 Multimeter DC Voltage Testing

Diagnosing electrical system problems isn’t always easy, and guessing is never an option.

Diagnosing electrical system problems isn't always easy, and guessing is never an option. Knowing the various techniques you can use with your digital multimeter can quickly solve most routine electrical problems.

View Full Diagram

LG Energy Solution’s Battery Facility to be Completed by 2026

LG Energy Solution said the cylindrical battery plant, called LG Energy Solution Arizona, will produce 46-Series batteries for EVs.

A Show of Changes

TechShop was on site in Orlando, FL for the Matco Tools Expo and the Mac Tools Tool Fair.

Green Li-ion Launches Lithium-Ion Battery Materials Plant

Located in Atoka, Oklahoma, it is North America’s first commercial-scale plant to produce recycled lithium-ion engineered battery materials.

Maverick Tire Changer: Handling Large Custom Wheels

Large, custom 4×4 wheels are all the rage, and Hunter’s Maverick tire changer makes handling them a breeze.

Other Posts

Introduction to the Maverick Tire Changer

Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

U Power Launching Commercial Operation for EV Battery Swapping

Its model for two-wheeled and light four-wheeled EVs is set for a formal commercial rollout in Wuhu, Anhui Province, China.

#5 Ratchet Basics

Although there’s evidence of earlier claims, the invention of the ratchet is credited to J.J. Richardson in 1863.

Hyundai Front Windshield Camera Sensor and Blindspot Calibration

Joe Keene discusses the calibration procedure for a Hyundai Santa Cruz that needed a windshield replacement and rear bumper repair.