Cabin Air Filter Q & A

Cabin Air Filter Q & A

Question: How do you replace a cabin air filter?
Answer: First you have to find it. The cabin air filter is usually located behind the glove box or at the base of the windshield in the cowl area over the HVAC inlet duct. The exact location can be found in the vehicle owner’s manual or a filter reference guide.

On most Fords, the filter is located under the hood in the cowl area. On Chrysler models, it is located under the dash. On GM products, it might be under the hood (Impala, Lumina and Monte Carlo), under the dash (Avalanche, Silverado, Suburban and Tahoe) or behind the glove box (Venture). On Toyota, Lexus, Nissan and most Honda models, you’ll find the filter behind the glove box.

On vehicles where the cabin air filter is mounted under the cowl at the base of the windshield, some disassembly may be required to replace the filter. This may involve removing a plastic cowl cover. The area around the filter usually collects debris, so this area should be cleaned to remove any leaves, bugs or other debris before the old filter is pulled out. This will prevent any contaminants from falling into the HVAC inlet duct.

On vehicles where the filter is located behind the glove box, the glove box may have to be removed to replace the filter. On others, the filter can be accessed from under the dash and pulled out of a slot in the HVAC unit.

Most cabin air filters are flat-panel filters, but some have unusual shapes, so they will fit the HVAC inlet duct. Some filters also come in two sections to make replacement easier.

Q. How often should a cabin air filter be changed?
A.
As often as necessary to prevent the filter from clogging, or in the case of cabin air filters that also absorb odors in addition to blocking dust, as often as needed to keep unpleasant odors to a minimum.

Under “normal” driving conditions for a vehicle driven primarily in a city or suburban area, or on paved highways, the average service life of a typical cabin air dust filter is about two to three years, or 25,000 to 30,000 miles. For a vehicle in a rural area that is driven frequently on gravel roads, the service life of the filter may only be six months or less.

Cabin air filters are very efficient and have electrostatically charged fibers that can trap particles smaller than 1 micron in size. Most quality cabin air filters will stop 100% of all particles that are 3 microns or larger in size and 95-99% of particles in the 1-3 micron size range. This prevents most pollens, mold spores and bacteria from entering the vehicle. Some cabin air filters are also treated with a chemical biocide to inhibit the growth of odor-causing bacteria, fungi and algae.

When a cabin air dust filter becomes clogged, it restricts airflow into the HVAC unit. This may cause reduced airflow and cooling from the air conditioner and/or lower heater/defroster output during cold weather.

If the cabin air filter is a combination type that has a layer of activated charcoal to absorb exhaust fumes and other unpleasant odors, the service life of the odor filter is only about a year, or 12,000-15,000 miles of normal driving. So when odors start to become more noticeable while driving (and they aren’t coming from leftover pizza or dirty socks in the back seat), it is probably time to replace the filter.

Q: How much time does it take to replace a CAF?
A:
Depending on the vehicle, replacement times are usually around 25-40 minutes, depending on location of the filter and housing removal.

According to ATP’s Interior Ventilation Filter Catalog, the BMW 3 Series has an approximate installation time at 45 minutes due to the removal of front dash panels.

On the other hand, CAF replacement for the BMW X5 is only about 10 minutes, since the filter is located in the center of the cowl under the hood.

In future issues, we’ll provide cabin air filter installation tips to show you the CAF location on select vehicles, the remove and replace procedures and estimated service times.

 

You May Also Like

AACF Launches 65th Anniversary Fundraising Initiative

The campaign aims to raise $65,000 through 1,000 donations of $65 each.

The Automotive Aftermarket Charitable Foundation (AACF) announced the launch of its 65th-anniversary fundraising initiative. Running through July 1, 2024, the campaign aims to raise $65,000 through 1,000 donations of $65 each. This impactful effort highlights the industry's commitment to taking care of its own, the AACF said. 

From sudden illness and death to natural disasters, the foundation has provided assistance to industry professionals and their families during their darkest hours. As AACF celebrates its 65th year of service, it remains steadfast in its mission to provide financial support and resources to those in the automotive aftermarket industry in need, the organization said.

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Lisle 61860 Oil Filter Housing Torque Adapter – Mueller Kueps Presents Redesigned Sensor Tap Series – Lisle Low Profile Fuel Line Disconnect   OTC Genisys Touch – Quick scan, bidirectional control Snap-on VANTAGE Pro –

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

BendPak Founder Don Henthorn Passes Away

Grew company from small machine shop to global leader in car lifts and garage equipment.

TOPDON USA Makes $25,000 Donation to TechForce Foundation

To date, TOPDON has donated over $66,000 to aid organizations and schools that are dedicated to preparing the next generation of auto technicians around the world.  

Registration Open for ETI ToolTech 2024

The event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.