DENSO Develops Passenger-Specific Heating and Cooling System

DENSO Develops Passenger-Specific Heating and Cooling System

DENSO Corp. says it has developed the world's first automotive air conditioning (A/C) system capable of heating/cooling the driver's area only. The new system can separately control the climate in three different cabin zones, the driver, front passenger and rear seat areas, which can help improve overall fuel economy when the A/C is on.

DENSO Corp. says it has developed the world’s first automotive air conditioning (A/C) system capable of heating/cooling the driver’s area only. The new system can separately control the climate in three different cabin zones, the driver, front passenger and rear seat areas, which can help improve overall fuel economy when the A/C is on.

“With DENSO’s new A/C system, the heating/cooling can be off in unoccupied areas, and temperature can be individually adjusted according to personal preferences when more than one area is heated or cooled,” said Akio Shikamura, senior executive director of DENSO’s Thermal Systems Business Group. “When the driver-side A/C is being used only, the A/C system can save up to approximately 20 percent* energy consumption on an annual basis compared with conventional models, which helps improve the vehicle’s fuel efficiency.”

How it Works:
As in-dash space is limited, it is important for DENSO’s new system to maintain the same size level as a conventional A/C system. With this in mind, the company developed a new internal structure for the heating, ventilation and air-conditioning (HVAC) unit. To separately control the climate of each area, DENSO divided the internal structure into five compartments with each compartment connected to specific air vents: the driver’s dashboard and the driver-side front window, the driver’s legs; the front passenger’s dashboard and front passenger-side front window; the front passenger’s legs; and the rear seat.

When an A/C system is in heat mode, it uses a large amount of outside low-humidity air to ventilate the cabin and to prevent window condensation. Previously, the same amount of cabin air was lost externally. However, DENSO’s new system only uses outside air for the driver and front passenger’s dashboard and front window vents. Compared to conventional products, this reduces the amount of warm cabin air lost by half, which also helps to reduce the amount of energy needed to operate the A/C.

The new A/C system was launched in the Japanese market and in other regions of the world earlier this year.

* Based on vehicle tests conducted by DENSO.

 

You May Also Like

Registration Open for ETI ToolTech 2024

The event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

The Equipment & Tool Institute's (ETI) Mission is to advance the vehicle service industry by providing technical data and open dialog between the manufacturers of transportation products, government regulators and the providers of tools, equipment, and service information. 

This mission is put into action at the annual ETI ToolTech event. This year, the event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion
Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool

Other Posts

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

ISN Expands Freedom Program for Mobile Tool Dealers

ISN’s Freedom Program is designed to provide experienced, successful mobile tool dealers with support to become an independent mobile dealer and expand their growth.

Snap-on Continues to Offer Free Weekly Product Training Sessions

The online training and question and answer sessions are free of charge.

Repairify Announces Executive Leadership Changes

The company has named Craig Edmonds as president of asTech among other executive appointments.