Matco Tools Versapower Power Source

Matco Tools Versapower: Power Source and Jump Starter

Matco’s Versapower has the ability to jump an F-150 V-8 18 times on one charge. This is possible because of the newest development in the Versapower’s Lithium Battery technology, which provides longer battery life and more power.

Matco Versapower

Featuring 300 cranking amps with 400 peak amps of power, the Matco Tools Versapower (MINIJUMP) can be used to jumpstart most domestic and import vehicle make and models, including cars, light trucks, ATVs and motorcycles. This versatile tool also conveniently serves as a portable power source for tablets, Apple products, cell phones and any other USB-powered devices.

“This very unique tool supports many features that anyone can appreciate in the shop or at home,” said Michelle Specht, senior product marketing manager of Allied/Specialty Tools at Matco Tools. “What makes the Versapower so special is that it’s small enough to put in your pocket, smart enough to charge your tablet or cell phone and powerful enough to jump start your vehicle.”

Despite weighing only 14 oz., the Versapower features a 12,000-milliamp battery and 100 more cranking amps than similar products on the market, according to the company, which are needed for tougher starting jobs. It also features a high visibility LED battery status bar so users know exactly how much power the device has remaining.

Matco’s Versapower has the ability to jump an F-150 V-8 18 times on one charge, whereas similar products are only able to jump the same vehicle 13 times before needing to be recharged. This is possible because of the newest development in the Versapower’s Lithium Battery technology, which provides longer battery life and more power.

The Versapower comes complete with jumper cables, a universal USB charging cable, an AC/DC charger, an ultra-bright LED flashlight with three modes and a durable carrying case.

The Versapower is now available exclusively from Matco Tools. To locate a distributor in your area or for more information on the product line, call 1-866-289-8665 or visit www.matcotools.com.

 

Matco Tools
Phone: 800-331-2427Fax: 330-926-5332

You May Also Like

CTA Tools Debuts Chrysler Cam Phaser Master Set – VVT & VVL

Applications included are for 2011-2022 Chrysler, Dodge & Jeep models.

The Master set includes: #5000 - Cam Phaser & Timing Chain Locking/Holding Set – VVT. #3925 - Cam Phaser Holding Set - Left/Front & Right/Rear – VVL. Cam Phaser & Timing Chain Locking / Holding kit for 3.0L, 3.2L, 3.6L VVT & VVL Pentastar engines. Includes 2 camshaft phaser holders, 5 timing chain holders & L-pin.

Mayhew Introduces New 14-Piece Micro Hand Tool Set

This new set is a compilation of all the current micro line products from Mayhew; including pry bars, picks, hooks and screwdrivers.

Victor Reinz Reinzosil Sealant Added to Spicer CV Service Kits

Victor Reinz Reinzosil vulcanizing silicone boosts resistance to various fluids, making it sensor-safe for a wide range of applications.

Gray Tools Introduces Insulated Hex Bit Socket Set

The insulated tool sets are backed by a limited lifetime warranty.

Snap-on Debuts New General Service Set 

The company says technicians now have maximized tool concentration in the smallest footprint.

Other Posts

Chevron Introduces New Rykon Formula to Grease Product Line

The new calcium sulfonate complex-based grease is designed for heavy-duty and extreme pressure applications.

New Small Stud Extractor Now Available from Mayhew Tools

This new stud extractor, 1/4″ drive, allows for stud and bolt removal from tighter spaces with a wide option of driver abilities for job versatility.

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
6250 1⁄4” Mini Rt. Angle Die Grinder

The low weight ultra-compact design provides added control and maneuverability.