Nissan Tech Tip: Diagnosing an Altima Engine Misfire

Nissan Tech Tip: Diagnosing an Altima Engine Misfire

The engine runs rough, gas mileage is down and more importantly the "check engine" light is on. That little illuminated check engine light strikes fear in the hearts and minds of the average vehicle owner - it's supposed to. Otherwise, people would keep driving their vehicles as long as they could, eclipsing the light with a piece of electrical tape.

The engine runs rough, gas mileage is down and more importantly the "check engine" light is on. That little illuminated check engine light strikes fear in the hearts and minds of the average vehicle owner – it’s supposed to. Otherwise, people would keep driving their vehicles as long as they could, eclipsing the light with a piece of electrical tape. That wouldn’t be good for our air quality. Luckily, most good citizens are of the belief that if that check engine light is on, not only is the vehicle going to leave them stranded at the most inopportune time, a plague could befall their entire family and their subsequent heirs for generations.

To the professional technician however, the "check engine" light is a sign that there may be a significant problem, but it’s probably nothing that’s going to change the course of history. With the help of ongoing education, a good scan tool and accurate diagnostic information, thousands of technicians repair "check engine" light related problems daily.

So why does something as simple as an engine misfire warrant a tech tip? Many techs assume that because automotive technology has become more complex, drivability problems have become more complex. In some ways they have, but on the other hand, sometimes facilitating a timely repair is just a matter of checking the simple basics.

In keeping with the simplicity theme, let’s cut straight to the details of this tech tip. If any of the applied vehicles (listed below) have a check engine light on, diagnostic trouble codes P0300 through P0304 (cylinder misfire) stored and/or exhibit a rough running engine, check the spark plug wire tubes and boots as follows:

Applied Vehicles:
• 1995-97.5 Altima (U13) models built before: 1N4BU31D3VC245368; and
• 1998 Altima (L30) models built before: 1N4DL01D8WC165916.

Applied Dates:
• 1995-97.5 Altima (U13) models built before March 5, 1997; and
• 1998 Altima (L30) models built before October 28, 1997.

PROCEDURE:
1. Remove the spark plug wires and inspect for water in the spark plug holes.

If water is in the spark plug holes, perform the following steps:
• Remove water from the spark plug holes.
• Insert a paper clip through the steam vent hole in the spark plug wire boots to insure the holes are clear (see Figure 1).

NOTE: The steam vent hole allows water vapor to escape if water becomes trapped in the spark plug hole.

• Inspect spark plug wire boots for cracks, hardening or deformities that could prevent sealing between the boots and the camshaft (valve) cover.
• Replace all spark plug wires if one or more of the boots show signs of cracks, hardening or deformities.

If the spark plug holes are dry and the spark plug wire boots are in good condition, proceed with step 2.

2. Inspect the entire surface of each spark plug wire tube for pinholes and/or cracks (see Figure 2).

• If one or more spark plug wire tubes have pinholes and/or cracks, replace all of the spark plug wires.

And there you have it — in these complex times, a simple solution to a simple problem. And all that was required was an ongoing education, a good scan tool and accurate diagnostic information. It’s up to you to provide the first two items. As for the last item — I’m always glad to help.

Written by ALLDATA Technical Editor, Rich Diegle. Rich is an Advanced Engine Performance Certified and ASE Master Technician with an Associate of Arts degree in automotive technology and 22 years of dealership and independent shop experience.

For additional information, visit www.alldata.com.

You May Also Like

Wrenchers Doubles Repair Tool & Equipment Offering

More than 25,000 lifts, tools, and equipment from 39 brands available online or by phone.

Wrenchers has more than doubled the vehicle repair tools and shop equipment available in its new catalog, offering over 25,000 car lifts, specialty tools, tire changers, shop fans, and more from 39 brands. 

“We are committed to continuously improving our product lineup to make Wrenchers a one-stop-shop for tools and garage equipment,” says Karla Zarate, director of sales operations. “When we launched Wrenchers as an improved version of long-time distributor Garage Equipment Supply in 2022, we had about 12,000 product numbers in our catalog. We’re at more than 25,000 now, with more in the pipeline. This means our customers can get more of what they need with just a click, rather than having to waste time shopping around.”

Myers Tire Supply Introduces MTS Xpresstm

The innovative solution to consolidate purchases and control inventory costs.

Experiencing What the Tool Industry Has to Offer

ETI held its annual ToolTech conference April 17-19 at the Hyatt Regency Tamaya Resort in Santa Ana Pueblo, New Mexico.

Sandia Mountains
LIQUI MOLY Develops Liquid Thermal Manager for EV Batteries

The automotive chemical specialist is expanding its range for all-electric vehicles with Battery Coolant EV 200.

May 2023 Vehicle Care RockStar: Johnny Weber

Johnny Weber exudes confidence in his abilities to lead the band through proficiency over pageantry.

Other Posts

Variable Valve Timing Systems

Variable valve timing systems allow today’s engines to maximize performance and drivability.

Continental Tire Upgrades Test Tracks for EVs

Continental expanded its EV charging infrastructure at three company-owned test sites in Sweden, Germany and the U.S.

Streamlight Names E.A. Langenfeld & Associates 2022 Automotive Sales Rep Agency of the Year

The company received the award yet again in recognition for outstanding national sales achievement.

MAHLE and Midtronics Join Forces for Battery Service 

The goal of the cooperation: holistic battery diagnostics and maintenance from a single source in a growing future market.