Nissan Tech Tip: Strut Replacement Guidelines

Nissan Tech Tip: Strut Replacement Guidelines

This bulletin provides information to correctly identify a strut on any 1990-2000 Nissan model that has slight oil seepage, a condition that is considered normal, doesn't affect the strut's operation or performance and doesn't require replacement. It also provides information to correctly identify leaking struts that require replacement.

This bulletin provides information to correctly identify a strut on any 1990-2000 Nissan model that has slight oil seepage, a condition that is considered normal, doesn’t affect the strut’s operation or performance and doesn’t require replacement. It also provides information to correctly identify leaking struts that require replacement.

Service Procedure:
Strut leaks are caused by deterioration of the oil seal due to wear, internal contamination or external contamination (i.e. outside dust or anti-corrosion spray entry). These factors can affect the strut seal mechanism and result in a gross oil leak. In such an instance, the strut needs to be replaced.

Note: If strut leakage is diagnosed in one strut, do not automatically replace struts on both sides. Replace only the leaking strut.

Strut seepage occurs as a thin layer of oil sticks to the strut’s shaft and passes through the seal. A very small amount of oil can escape and stain the upper exterior of the strut. The amount of oil seepage present on the strut can be affected by ambient temperature variations and driving conditions (extreme hot or cold weather or rough road conditions can increase the amount of seepage). Seepage is considered a normal condition since it doesn’t affect the operation and performance of the strut.

Identifying Strut Leakage vs. Strut Seepage:
Note: The following criteria can also be applied to shock absorbers.

A strut that is leaking and needs to be replaced will exhibit a substantial amount of oil around the exterior body of the strut. The oil layer will extend below the spring seat (dish), will be thick, contain large pieces of dust and debris, and will saturate the strut rod.

A strut that is seeping will exhibit a thin layer of oil stain on the exterior body of the strut. The oil stain will not usually extend beyond the spring seat (dish), but may be past the spring seat under conditions such as changes in ambient temperature or driving conditions. The oil stain will not be thick, nor will it contain dust or debris.

Technical service bulletin courtesy of Mitchell 1.

For more information on Mitchell 1 products and services, automotive professionals can log onto the company’s website at www.mitchell1.com.

You May Also Like

Toyota Invests in EV Charging Network IONNA

IONNA plans to install at least 30,000 charging ports in North America by 2030, and stations will include both NACS and CCS connectors to support all BEV drivers.

IONNA and Toyota Motor North America announced that Toyota has joined seven other automakers as an investor in IONNA to support the buildout of its high-powered charging network for battery electric vehicles (BEVs) across North America. This allows Toyota and Lexus customers access to the public network of DC fast chargers IONNA will begin deploying later this year, the company said. IONNA plans to install at least 30,000 charging ports in North America by 2030, and stations will include both NACS and CCS connectors to support all BEV drivers.

K-Tool International Celebrates 40th Anniversary 

K-Tool International Celebrates 40th anniversary at Tool Dealer Expo with show promotions and prizes.

Wallbox Announces the Launch of Faster Charger

The newest addition to the product family is designed to charge at up to 220 kW.

Autel MaxiSYS Ultra Enhances Efficiency At Mighty Auto Pro

Time is money in vehicle repair, and the Autel MaxiSYS Ultra is all about enhancing technicians’ diagnostic prowess.

Road to AAPEX Ep. 1: The Future Legacy of the Automotive Aftermarket

Travel a new Road to AAPEX this season by watching the first episode in this year’s Road to AAPEX series.

Other Posts
Hunter RX Series Scissor Lift: Harsh-Duty Option

The RX Scissor Lift Harsh Duty Option is built for the Rust Belt with a zinc primer base and epoxy-filled joints to protect against salt and corrosion.

Volvo Cars Starts Production of Fully Electric EX90 SUV

The EX90 is based on its next-gen EV technology base, with a fully electric range of up to 372 miles.

EV Safety Basics on the Shop Floor – Part II

OE guidelines and safety procedures as well as the proper PPE and tools will keep you safe when working on an EV.

Blink Charging Achieves ‘In Process’ FedRAMP Status

Once fully accredited, Blink’s EV charging network will be available to government agencies.