SP Tools Offers Shielded Oxygen Sensor Socket
SP Tools’ Shielded Oxygen Sensor Socket (#66750A) has been designed to R&R most shielded oxygen sensors currently found on Toyota and Lexus vehicles, including most four-cylinder engines with shielded oxygen sensors. The depth and outer diameter of the socket are critical features enabling it to fit in the limited space of the ….
SP Tools’ GM Door Hinge Bushing Installer Accurately Guides and Holds the Bushing in Place
With the GM Door Hinge Bushing Installer (#66200) from SP Tools, you can easily install the replacement silicon bronze bushings on door hinges. In usage, the restricted area of the hinge is not accessible for a straight and true installation of the bushing. This unique tool allows easy access when installing ….
SP Tools Offers VW/Audi Timing Belt Pulley Holder
SP Tools’ crank pulley holding tool (67600) has been developed to aid in the removal and installation of the crank bolt on VW and Audi four cylinder engines. These crank pulleys need a special tool to hold the pulley stationary for the crank bolt to be removed and reinstalled to the ….
SP Tools Introduces Air Brake/Treadle Valve Holding Tool
SP Tools is now offering the Bendix Type Air Brake/Treadle Valve Holding Tool (P/N 67400). This specially designed holding tool was manufactured to hold two treadle valves so that the attaching air pressure fittings can be exchanged from the old valve to the ….
SP Tools Introduces 24 mm Flare Nut Wrench
This special 24 mm flare nut type wrench for Cummins diesel motors with common rail injection (#66150) from SP Tools will slide back into the recessed area of the cylinder head where the fuel line retainer screws into the head. Without this special depth and angles flare nut wrench, you cannot hold the ….
GM Door Hinge Bushing Installer from SP Tools Simplifies Repair Job
With the GM Door Hinge Bushing Installer (#66200) from SP Tools, you can easily install the replacement silicon bronze bushings on door hinges. In usage, the restricted area of the hinge is not accessible for a straight and true installation of the bushing.
SP Tools Offers Harmonic Damper Pulley Holding Tool
SP Tools’ Toyota 3.4L Harmonic Damper Pulley Holding Tool (#64400) features a unique two-pin design that holds the harmonic damper pulley on Toyota 3.4L V6 engines for crank bolt R&R. This tool allows factory torque to be attained to seat the pulley properly. Works with 1996-2002 4Runners, 1996-1998 T100 pickups, 1996-2004 Tacoma pickups and 2000-’04 Tundra pickups.
SP Tools’ Variable Angle Valve Stem Seal Pliers Allow Techs to Remove Valve Stem Seals in Tight Places
These unique pliers from SP Tools, #62900, were designed to enable the professional technician to reach for and remove valve stem seals that are inaccessible to standard valve stem seal pliers.
SP Tools’ GM Door Hinge Bushing Installer Simplifies Repair Job
With the GM Door Hinge Bushing Installer (#66200) from SP Tools, you can easily install the replacement silicon bronze bushings on door hinges. In usage, the restricted area of the hinge is not accessible for a straight and true installation of the bushing.
SP Tools Offers Offset Damper Pulley Holding Tool
SP Tools now offers a Honda and Acura long 4-inch Offset Damper Pulley Holding Tool, #60100A, that works with all older and new applications. Simply insert the tool, with a breaker bar attached, into the 50 mm harmonic damper pulley and, using a ratchet with a socket attached, R&R the pulley bolt.