Tech Tip: Avoid Over-Filling Oil in Ford Engines

Tech Tip: Avoid Over-Filling Oil in Ford Engines

Incorrect oil levels are being found in many 2002-2003 Ford, Lincoln and Mercury vehicles. In most cases, the level is being misinterpreted because the oil level on the dipstick is not touching the top hash mark at the upper limit (or MAX mark), or it is partway down the crosshatch area.

By Rich Diegle

Incorrect oil levels are being found in many 2002-2003 Ford, Lincoln and Mercury vehicles. In most cases, the level is being misinterpreted because the oil level on the dipstick is not touching the top hash mark at the upper limit (or MAX mark), or it is partway down the crosshatch area.

Ford is in the process of standardizing the marking across all vehicle lines. The markings shown in Figure 1 were scheduled to be upgraded to a refined marking, but both markings were still being used in many 2004 and 2005 models. Oil levels will continue to be recorded in the crosshatched area of the blade, between the upper and lower limit holes. Vehicles with engine oil levels falling within this area are acceptable and do not require topping off.

SERVICE PROCEDURE
Ensure the vehicle is sitting on level ground. Set the parking brake and make sure the transmission selector lever is in the Park position or in First gear on manual transmissions. The engine must be off.

The best time for determining oil level is after the oil has had sufficient drain-back time to the sump. If the engine has been running, allow it to sit for a few minutes turned off. An oil drain-back period is required before taking an initial reading.

If the level falls below the lower hole, fill with one quart of oil. If one quart is insufficient to raise the level above the lower mark, add oil until it records within the crosshatch area. Use caution during this procedure as some time is needed for oil to drain down through the drain-back passages in the cylinder head to the oil pan. Adding oil a quart at a time repeatedly without sufficient drain-back may overfill the sump.

If the oil level falls between the upper and lower holes, do not add more oil. Adding an extra quart could cause over-filling and may result in aeration (foaming) causing eventual damage to vital bearing surfaces and moving parts inside. Over-filling will require some oil to be drained until the indicator shows the level between the upper and lower holes of the blade. An extra quart of oil should never be considered as additional lubrication protection for the engine.

For additional information on ALLDATA, visit www.alldata.com.

Rich Diegle is technical editor at ALLDATA. Diegle is an Advanced Engine Performance Certified ASE Master Technician with an AA degree in automotive technology and 23 years of dealership and independent shop experience.

You May Also Like

Autel Expands Presence in Asia, Australia

Autel expands in the Asia-Pacific region with new energy vehicle charging solutions for residential and commercial use.

Autel announced it is accelerating its expansion into the Asia and Australian markets with a full range of new energy vehicle charging solutions for both residential and commercial use.

The move is part of Autel’s strategy to expand its presence and provide comprehensive solutions to meet the needs of customers in different regions, the company says.

Get To Know The Equipment and Tool Institute (ETI)

Executive director of ETI sits down with editor Nadine Battah to discuss ETI and the events it hosts.

Utilizing NVH Tools

Technology has been improving on NVH tools over the years.

Charging Ahead With EV Opportunities

New data shows there will be room for – and a need for – products for both incoming electric and ICE vehicles.

Streamlight Stinger Color-Rite Rechargeable Flashlight

TechShop Reveal provides a 360 product video highlighting the industry’s latest innovations.

Other Posts

Why Is This Brand New PS Pump So Noisy?

There are several questions which you should ask yourself in this scenario. This video is sponsored by Rislone.

DOE Puts $48M Toward Improving America’s Power Grid

This effort aims to better control grid power flow to avoid outages, which costs the economy $150 billion annually.

Autel, Repairify Announce Collaboration Agreement

Repairify will integrate within Autel’s Remote Expert platform.

Job Corps, Mercedes Partner to Offer EV Technician Training

The agreement will allow Mercedes-Benz USA to develop the curriculum and train Job Corps instructors to deliver it.