Tech Tip: Pontiac Vibe CAF Replacement Procedure

Tech Tip: Pontiac Vibe CAF Replacement Procedure

Should you get a 2003-'06 Pontiac Vibe in your shop that is in need of a Cabin Air Filter (CAF) replacement, adhere to the following steps to provide this service. The CAF on this vehicle is located behind the glove box door inside the filter housing ....

Should you get a 2003-’06 Pontiac Vibe in your shop that is in need of a Cabin Air Filter (CAF) replacement, adhere to the following steps to provide this service.

The CAF on this vehicle is located behind the glove box door inside the filter housing.

1. Open the glove box door.
2. Remove the Philips-type screw located at the right side of the glove box door and slide off the connecting rod (See Figure 1)

3. Push in on each side of the glove box door to release the tabs. Swing the glove box door down (See Figure 2).

4. Lower the filter housing door and remove the CAF by pulling toward you (See Figure 3).

5. Installation is in the reverse order of removal.

Courtesty of ATP-Inc.

For additional information on products offered by ATP-Inc., visit www.atp-inc.com.

You May Also Like

#6 Multimeter DC Voltage Testing

Diagnosing electrical system problems isn’t always easy, and guessing is never an option.

Diagnosing electrical system problems isn't always easy, and guessing is never an option. Knowing the various techniques you can use with your digital multimeter can quickly solve most routine electrical problems.

View Full Diagram

LG Energy Solution’s Battery Facility to be Completed by 2026

LG Energy Solution said the cylindrical battery plant, called LG Energy Solution Arizona, will produce 46-Series batteries for EVs.

A Show of Changes

TechShop was on site in Orlando, FL for the Matco Tools Expo and the Mac Tools Tool Fair.

Green Li-ion Launches Lithium-Ion Battery Materials Plant

Located in Atoka, Oklahoma, it is North America’s first commercial-scale plant to produce recycled lithium-ion engineered battery materials.

Maverick Tire Changer: Handling Large Custom Wheels

Large, custom 4×4 wheels are all the rage, and Hunter’s Maverick tire changer makes handling them a breeze.

Other Posts

Introduction to the Maverick Tire Changer

Joe Keene speaks with Hunter Engineering service rep Rick Marzen on Hunter’s premium center-clamp Maverick tire changer.

U Power Launching Commercial Operation for EV Battery Swapping

Its model for two-wheeled and light four-wheeled EVs is set for a formal commercial rollout in Wuhu, Anhui Province, China.

#5 Ratchet Basics

Although there’s evidence of earlier claims, the invention of the ratchet is credited to J.J. Richardson in 1863.

Hyundai Front Windshield Camera Sensor and Blindspot Calibration

Joe Keene discusses the calibration procedure for a Hyundai Santa Cruz that needed a windshield replacement and rear bumper repair.