Coolant Leak Caution On 1995-2003 Nissan 3.0L And 3.5L Engines

Coolant Leak Caution On 1995-2003 Nissan 3.0L And 3.5L Engines

A severe coolant leak from the water pump's weep holes causes the coolant to destroy the pump's bearing as well as leak into the engine's oiling system. Catastrophic engine failure can result. Be aware of the potential leak points and do not ignore the signs of a leak. It also is recommended that the water pump be changed whenever servicing the timing chain and/or internal timing components.

CONDITION: A severe coolant leak from the water pump’s weep holes causes the coolant to destroy the pump’s bearing as well as leak into the engine’s oiling system. Catastrophic engine failure can result.

CAUSE: This engine’s water pump is buried beneath the timing cover since it is internally driven off the engine’s timing chain. Since the front of the pump has direct contact with the engine’s oiling system, the weep holes have been rerouted.  Leaking coolant is channeled back through the pump and into the engine block.  Therefore, if the water pump seal fails, the noticeable leaks will occur as coolant exits the left side of the engine block just below the thermostat housing.

CORRECTION: Be aware of the potential leak points and do not ignore the signs of a leak. It also is recommended that the water pump be changed whenever servicing the timing chain and/or internal timing components.

Use replacement water pump AIRTEX P/N AW9309.

Courtesy of ASC Industries.

You May Also Like

Registration Open for ETI ToolTech 2024

The event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

The Equipment & Tool Institute's (ETI) Mission is to advance the vehicle service industry by providing technical data and open dialog between the manufacturers of transportation products, government regulators and the providers of tools, equipment, and service information. 

This mission is put into action at the annual ETI ToolTech event. This year, the event will be held on April 22-24, 2024 in Newport Beach, CA, at the VEA Newport Beach Marriott.

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits   OTC Genisys Touch – Quick scan, bidirectional control Snap-on VANTAGE Pro

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

New Snap-on Limited Edition Speed Demon Roll Cab

Features include next-level organization, durability, security, mobility and exclusive Speed Demon emblem.

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

ISN Expands Freedom Program for Mobile Tool Dealers

ISN’s Freedom Program is designed to provide experienced, successful mobile tool dealers with support to become an independent mobile dealer and expand their growth.

Snap-on Continues to Offer Free Weekly Product Training Sessions

The online training and question and answer sessions are free of charge.