VIEWPOINT:Monday Morning MIL Light Quarterback

VIEWPOINT:Monday Morning MIL Light Quarterback

Monday mornings are typically not very productive for me. I typically will hide in my office with the light off to avoid people asking about their latest weekend-induced car problems.

Monday mornings are typically not very productive for me. I typically will hide in my office with the light off to avoid people asking about their latest weekend-induced car problems. 
 
Half of the questions are about sounds they have heard coming from their vehicles, and if I could take a look. The other half are questions about MIL lights that have come on. 
 
When I started, most of the issues were catalyst efficiency codes or EVAP systems. I would not erase the code and advise them they should go to a shop to have the problem fully diagnosed. Most of the people were concerned that they were doing damage to their vehicle. This is a good thing.
 
Then there is Mike. (The names, places and cars have been changed to protect the names of the innocent. However, most of these stories are true.) He is a good friend, but he is a little paranoid of shops and the ‘OEM Conspiracy.’ He is also a little bit of a ‘skinflint’ looking for new ways to save money. But, he is also concerned that he could be damaging his vehicle by letting a MIL light condition go for too long. 
 
Some Monday morning starts out with one of Mike’s stories about how he was taking the kids to one of their numerous sporting events in the area or going to their cottage on the Portage Lakes. With the skill of a master storyteller, he usually describes how a glowing light came on in the instrument binnacle at the worst possible time during his travels and how the light had put damper on his entire weekend. 
 
I like Mike’s stories. Last week, he faced ABS and stability control system MIL lights that had him flipping through the owner’s manual in a parking lot looking for solace (he could not find my cell phone number). The light stayed on after he started the car after a trip to a Swenson’s Drive In.
 
The vehicle is not as important to this diagnostic dilemma as was his reaction to the light. In my experience, most people who have an ABS light illuminated are almost in a state of denial. They rationalize that it may go out soon or that they do not need this critical safety feature (these are typically the people who need it the most). Believing it won’t leave them stranded, they typically put off a trip to the shop. 
 
Mike’s reaction to the ABS and Stability MIL lights was appropriate for the situation. The SUV he drives is usually loaded with kids and equipment. He has had to use the stability control system more than once after addressing a distraction in the backseat. 
 
On my advice, he took it to a shop. After some diagnostic time, they found that a large amount of orange soda made its way into the center console and to the yaw and lateral acceleration sensor cluster where it caused an issue with the CAN bus connecting it with the ABS module and other systems. 
 
The shop was able to handle the problem because they had the proper tools and training. The next day the story about him interrogating his kids about the orange soda was very entertaining.
 

You May Also Like

Snap-on Continues to Offer Free Weekly Product Training Sessions

The online training and question and answer sessions are free of charge.

Snap-on national training manager Keith Wray will continue to hold weekly new product training sessions throughout the year that give professional technicians the opportunity to learn more about Snap-on Fast-Track Intelligent Diagnostics tools such as the ZEUS, TRITON and APOLLO series. 

The online training and question and answer sessions are free of charge and are conducted as follows:

Scan Tools: Solving the Diagnostic Puzzle

“The fact is, the most expensive tool may not be the best tool for you. It depends on what vehicles you work on and what you want out of the tool.” – Dwayne Myers, Dynamic Automotive, Frederick, MD Related Articles – ISN’s Annual Tool Dealer Expo Gives Attendees Sneak Peek at New Products – Editor’s

ISN’s Annual Tool Dealer Expo Gives Attendees Sneak Peek at New Products

The TechShop team and more than 3,500 attendees from around the world recently joined Integrated Supply Network (ISN) at its 14th annual Tool Dealer Expo June 24-25 in Orlando, FL. There, suppliers launched new products and gave away more than $2 million in cash and prizes throughout the weekend event. Related Articles – Beyond the

Editor’s Notes: ‘The Rising Tide Lifts All Boats’

For the past year and a half, in addition to being editor of TechShop, I’ve also carried the role as editor of our student publication Tomorrow’s Tech, which is delivered to NATEF-certified automotive technical programs throughout the U.S. With this responsibility, I’m keenly aware of the industry’s need for the next generation of automotive service

Make Aluminum Welding Easier with Cebotech’s MIG Welders

All three of Cebotech’s MIG welders (models 301, 302 and 322) were designed to make aluminum welding easier. Related Articles – TOPDON Debuts 2-in-1 Jump Starter and Battery Tester  – ContiConnect Lite to Allow Digital Tire Management for OTR tires – New Snap-on Limited Edition Speed Demon Roll Cab They’re supplied with built-in welding programs for easy setup,

Other Posts

Identity Crisis and the Rise of the Specialist

Is it time to move on from ‘technician’ and become ‘specialists’ in the shop?

Repairify Announces Executive Leadership Changes

The company has named Craig Edmonds as president of asTech among other executive appointments.

PRT Launches 22 New Products on Complete Strut Assemblies

The new items come to expand the PRT portfolio in North American Market and represents more than 12 Million vehicles in new coverage.

Autel to Bring OEM Repair Data to its Ultra Series Tablets

Autel partners with MOTOR Information Systems to provide an improved experience for users and more streamlined access to OEM repair information using MOTOR’s TruSpeed Repair.