Tech Tip: Oil Leak From Bell Housing/Torque Converter on Hyundai Models

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Techshop Magazine
The automotive industry’s knowledge base for equipment, tools and supplies
Equipment

Tech Tip: Oil Leak From Bell Housing/Torque Converter on Hyundai Models

Some transaxles may experience an oil leak in the bellhousing behind the torque converter. If this occurs, the oil leak will be observed at the drain hole on the lower surface of the transaxle.

TechShop Staff Writers
By TechShop Staff Writers
Published:

Repair Diagnosis:
If you are servicing a vehicle with this condition, refer to the below table to determine the proper repair procedure:

Related Articles

Repair Procedure:
1. Remove the transaxle.

2. Remove the torque converter.

3. Use a suitable tool to remove the oil seal.

4. Apply a thin coat of ATF to the lip of the oil seal before installation. Use the special tool (09452-21200) to install the oil seal (P/N 46131-36002) to the oil pump housing.

 

Technical service bulletin courtesy of Mitchell 1.

For more information on Mitchell 1 products and services, automotive professionals can log onto the company’s website at www.mitchell1.com.

 

You May Also Like

Equipment

New Snap-on Limited Edition Speed Demon Roll Cab

Features include next-level organization, durability, security, mobility and exclusive Speed Demon emblem.

TechShop Staff Writers
By TechShop Staff Writers
Published:

The new Snap-on KETP682A3WHZ Limited-Edition Speed Demon EPIQ 68" Roll Cab adds “wow” factor in a tool storage showpiece. Next-level organization, durability, security, mobility, and the exclusive Speed Demon emblem represents everything enviable about working in the industry that keeps the world moving.

“The Speed Demon’s exclusive badging features an intricately detailed skull intertwined with pistons and an engine, symbolizing speed and the rebellious spirit that comes with being part of the automotive and heavy-duty worlds that combine high-level skills with high-level power,” says Angelo Gargano, Snap-on Product Manager. “The fusion of skull and pistons evokes a sense of raw energy and daring, while the meticulous craftsmanship of this roll cab reflects both techs’ and Snap-on’s dedication to quality and innovation.”

Read Full Article

More Equipment Posts
AMD-035 Membrane Dryer Provides Ultra-Clean & Ultra Dry Air

The dryer has a flow rating of 35 SCFM and maximum working pressures of 150 PSI.

By TechShop Staff Writers
BendPak Full-Rise Scissor Lift Delivers Two-Post Performance

SP-7XE scissor lift lays flat and raises a vehicle six feet with an open center below.

By TechShop Staff Writers
BendPak to Debut Eight-Armed Car Lift Concept at NADA

Octa-Flex improves technician productivity, convenience and ergonomics, according to BendPak.

By Mary DellaValle
Matco’s New Ghost Cart: Where Tools and Style Spookily Align

Haunt your shop with efficiency: Matco’s 2023 Ghost Cart is sleek and functional.

By TechShop Staff Writers
Matco Ghost Cart tool storage

Other Posts

Cordless vs. Pneumatic: The Battle Continues

What does the future hold? Will one gain the upper hand over time?

By Eric Garbe
Red and Blue toy robots boxing
TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

By Eric Garbe
toolbox guide illustartion
Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

By Nadine Battah
Nadine Battah
TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

By Eric Garbe
Tire tread