Gonzo's Toolbox: Three Gallons of Trouble

Gonzo’s Toolbox: Three Gallons of Trouble

One of my regular customers brought his son into the shop the other day. It was right at opening time and good old dad made it a point to tell his son: "Gonzo probably hasn't had his coffee yet, so go easy on the old guy." He was right about the coffee, but that still didn't prepare me for the story I was about to hear.

One of my regular customers brought his son into the shop the other day. It was right at opening time and good old dad made it a point to tell his son: "Gonzo probably hasn’t had his coffee yet, so go easy on the old guy."

He was right about the coffee, but that still didn’t prepare me for the story I was about to hear. The story started sometime earlier, apparently after I changed the fuel pump two years ago his gas mileage had dropped considerably. He was very upset and believed that I had done something done wrong to cause it.

He insisted I was to blame because he always tracked his mileage by way of his trip odometer. Before the new fuel pump, he would get close to 400 miles per tank. His accuracy was noted on his little logbook and showed how much gas he would refill his tank with. It was always around 23 gallons and never a drop more than 23 gallons. But now his tank was holding 26 gallons. His question, “So, where is the other three gallons going?” I had to laugh, I’ve changed a lot of fuel pumps, but I never have had anyone come in and tell me that it holds more fuel than before.

My guess was that his original gas tank sending unit was probably inaccurate and that was where his discrepancy was at.

“I’m pretty sure your gas tank hasn’t increased in volume since a fuel pump has been changed. I would imagine you’re probably mistaken as to how much your tank actually holds,” I told him as I reached for my coffee.

Nope, he wasn’t buying that answer. He knew how much his gas tank has always held and he knew I was the cause of his three missing gallons. What he wanted was for me to find out why his gas mileage has decreased so much.

I tried to explain it to him, but he was very, very sure he was correct and I wasn’t listening to what he was saying and he was getting quite loud and belligerent over the whole matter. Poor old dad just sat there with a smirk on his face. I kind of figured dad had already had enough of his boy’s attitude and figured old Gonzo was going to straighten him out. (This is going to take a lot more coffee.)

The aggravated son then began to tell me how he was a good mechanic. He had rebuilt a few motors in the past so he knew what he was doing under a hood.  (Note:  Putting parts together is like putting a puzzle together. There is a lot more to being a mechanic).

He was grasping at possible reasons why his gas mileage had dropped so much.  What gets me is how something as important as the involvement of the service light isn’t brought up into the conversation until after you have told me how good a tech you are and that you have already made the incompetent decision that I was to blame. (I’m going to need more coffee.)

So at this point, we have a service light on and we have a supposed loss of fuel economy (sort of). I’m sure there is more, there is always more,  so I had to ask, “Anything else?”

After dad and son dropped the truck off, I went straight to the glove box. I checked the owner’s manual as to how much capacity the fuel tank held. It had it in big bold letters: “26 gallon capacity,” not 23 as he was so sure of.

The next thing was to tackle the check engine light. Yes, there was a code. A code that might lower gas mileage, sort of, but not by three gallons. It was the EVAP solenoid valve code,  p0449. After doing the test on the valve, it turned out the valve wasn’t responding to the PCM commands.  A new EVAP solenoid valve solved the problem.

After all the phone calls were made and he arrived to pick up his truck, there was never any mention of the so called missing three gallons or the fact that it was merely the original fuel sender that was reading improperly all this time. Or the fact that the loose gas cap had nothing to do with the service light this time around.

I guess when you’re the customer, you don’t have to admit when you’re wrong, but you can be darn sure if the mechanic is wrong, everyone would know about it, and somebody would have to apologize.

Oh, and I apologize for being the mechanic in this story, and I guess I should apologies for one more thing … writing in BIG letters on his invoice: YOUR TANK HOLDS 26 GALLONS!

You May Also Like

Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah

Remember last month how I said 2024 was your year to be the technicians you always wanted to be? Remaining stagnant as a technician is simply not an option anymore if you want to be successful in the automotive industry. You must proactively seek out opportunities to embrace new tools, techniques and solutions that promise to enhance efficiency, accuracy and customer satisfaction.Embracing what’s new is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.One of the top reasons I can give you for embracing new technology is the potential for improved diagnostic accuracy and efficiency. With the arrival of advanced diagnostic tools, like the Bosch ADS 625X, the Autel IA900, or the Hunter ADASLink, technicians can pinpoint issues with precision, reducing guesswork and minimizing the risk of a comeback. Whether it’s sophisticated tools or cutting-edge software solutions, the ability to leverage these new tools should empower you to deliver next-level service and drive positive repair experiences for your customers.Another thing to keep in mind is that embracing new technology and equipment opens doors to expanded service offerings. From state-of-the-art lifts and alignment systems, to specialized tools designed for specific makes and models, investing in the latest equipment enables you and other technicians to tackle a larger range of repairs and maintenance with confidence and precision. As the technology in cars continue to evolve, so too must the tools and equipment that technicians rely on to get the job done.Embracing new technology and equipment can also lead to improved productivity in the shop. By leveraging high-quality products that are specifically designed for today’s vehicles, you can streamline workflow, minimize downtime and deliver exceptional results for your customers.At TechShop, we understand the importance of embracing new technology, equipment and products in the automotive repair industry. That’s why we’re excited to announce the debut of our all-new “Tool Time” video podcast series, where guests from brands like Ingersoll Rand, Clore Automotive, SATA Spray Equipment and many more will sit down and join Eric Garbe and myself to discuss education and training on the latest products our industry has to offer.Join us as we embrace the future of automotive tool supply and equipment advancements together. And, be sure to subscribe to the TechShop newsletter to stay tuned!

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

happy new year 2024
Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Other Posts

Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter
More Than A Scan Tool

Scan tools serve as indispensable diagnostic hubs, offering access to a wealth of resources, from OEM technical bulletins to community-documented repairs.

scan tool
Battling Stress and Burnout

Here are some quick tips for managing stress and avoiding burnout in the fast-paced automotive repair industry.

Nadine Battah