Hyundai Tech Tip: Throttle Position Sensor Driveability Symptoms

Hyundai Tech Tip: Throttle Position Sensor Driveability Symptoms

The Throttle Position Sensor (TPS) output signal is an important input for both the engine and transaxle control modules. A malfunctioning TPS may result in numerous symptoms.

The Throttle Position Sensor (TPS) output signal is an important input for both the engine and transaxle control modules. A malfunctioning TPS may result in the following symptoms:
• Unstable idle;
• Uneven throttle response;
• Slip and shock during the 1-2 and 2-3 shift on Automatic Transaxle (ATM)-equipped vehicles;
• Erratic ATM shifts with possible shift flare (engine RPM increases during shifts);
• Check that the engine light is on (light may go off, but the code will remain stored); and
• TPS-related code stored in the ECM and/or TCM.

Affected Models:
• 1996-1999 Accent;
• 1996-2000 Elantra; and
• 1997-2000 Tiburon.

Repair Information:
1. Check to see if the following three conditions are met:
• The TPS is suspected;
• The ECM/TCM has no codes stored; and
• The TPS has the words “DAE SUNG” molded on the part.
If so, conduct the following diagnostic procedure:
• The vehicle must be idling (with all accessories turned off).
• Push on the side of the TPS connector toward the dash panel. The force used should be firm enough to slightly deflect the TPS housing, but not enough to damage or break anything.
• If the TPS is not operating properly, the engine will surge in response to your push.
• If the Hi-Scan Pro or HDS is used to record the TPS output, the above procedure will show that the TPS output increases toward 5V when the connector is pushed.
2. If the ECM has a TPS-related code stored (with or without the MIL on), replace the TPS.

Technical service bulletin courtesy of IDENTIFIX.

For additional tech tips, visit www.identifix.com.

You May Also Like

CITGO Enters EV Space with Pilot Program Launch

The CITGO location on 11 Mile Road in Michigan now offers both regular transportation fuel and EV charging stations.

CITGO Petroleum Corporation, along with marketer Folk Oil Company, recently launched an electric vehicle (EV) charging pilot program they said is designed to meet the needs of EV drivers in Battle Creek, Mich. The CITGO location at 15551 11 Mile Road now offers both regular transportation fuel and EV charging stations. For added consumer convenience, EV chargers include both Charging System (CCS) and the North American Charging Standard (NACS) plugs, the companies said.

TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion
Stellantis Increasing Production of Electric Drive Modules

The company will add EDM production in Szentgotthard, Hungary, targeted to begin in late 2026.

Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
Tool Time Podcast: Clore Automotive

Jim O’Hara from Clore Automotive joins Nadine Battah and Eric Garbe.

Other Posts

TechShop, ShopOwner Offer $50 For Good Guesses

Guess the Tool for a chance at cold hard cash!

GM, Honda Begin Volume Production of Fuel Cell Systems

GM and Honda will produce fuel cells that will be two-thirds less expensive compared to Honda’s 2019 Clarity fuel cell.

Toyota Bringing Battery EV Production to Kentucky

It will invest $1.3 billion at its flagship Kentucky facility for future electrification efforts, including assembly of an all-new, three-row battery electric SUV for the U.S. market.

Repairify Announces Executive Leadership Changes

The company has named Craig Edmonds as president of asTech among other executive appointments.