Ignorance Is Intent: Fatalities On The Rise

Ignorance Is Intent: Fatalities On The Rise

Recently, the National Highway and Traffic Safety Administration (NHTSA) announced that traffic fatalities were up by nine percent. This is a huge jump. My theory is that the rise in fatalities is the apathy of American motorist towards maintenance and proper repair of their vehicles.

 
Recently, the National Highway and Traffic Safety Administration (NHTSA) announced that traffic fatalities were up by nine percent. This number has consistently been declining every year since the 1970s by at least two percent. The last increase was blamed on a computer problem due to the implementation of a new crash reporting system. 
 
The blame this time was not placed on drunk driving or texting. The age of the drivers did not indicate the baby boomers were the cause. The weather was also the mildest in decades. Also, miles driven rose only one percent during the same time.
 
My Theory 
Nine percent is a huge jump. My theory is that the rise in fatalities is the apathy of American motorist towards maintenance and proper repair of their vehicles. I would not say the spike was due to the economy or fuel prices.
 
On the internet, it is possible to look at hundreds of local newspapers documenting car crashes in their respective communities. Over the past 12 months, I have seen the rise of crashes where the mechanical condition of the vehicle played a part in a crash. 
 
In one report, a driver with bad brakes was killed and injured three members of his family. But, he is praised for taking the brunt of the impact on the driver’s side to “save his family.” In another report, a driver ran over two pedestrians (they were jay walking at night) and the police discovered the front brakes were not working (he received only five days in jail). I could go on and on. 
 
In all the cases, the drivers ignored their vehicle’s condition to the point where it put everyone’s safety at risk. It was not that the drivers’ intent to injure or kill, it was ignorance and optimism that made them get behind the wheel. 
 
There are very small penalties for some drivers and their transgressions because ignorance does not mean intent to law enforcement and the courts. A driver could injure or kill an entire family, but if it was a mechanical problem that contributed to the crash, there are no criminal charges.  
 
It has gotten so bad that some people cry “brake failure” rather than admitting they knew their vehicle was unsafe or they were distracted. One driver tried to use the excuse his brakes failed after killing two construction workers in Colorado. The police found that his 2007 Subaru had nothing wrong with the brakes.
 
Bitter Sweet Irony
The irony is that shops get punished for using legitimate fear as a sales technique. If a service advisor behind the counter at a shop tries to inform a person on how their neglect could cause a crash, they are accused of fraud. Something is not right about this. 
What some people call an accident, I call negligence. It is a negligence that can be avoided with proper vehicle inspection and repair. There is just something not right about people dying and the ones that can save them have their hands tied.
 

You May Also Like

Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool

If there’s a truth that extends across all computerized devices, it’s that we likely utilize only a fraction of the things they have the ability to do. Mobile phones are a great example. How many people do you know who only use them for calls, voicemail and text messages? We all know they do so much more.The scan tools we use every day fall into the same category. Are you maximizing yours to their full potential? Don’t let them be just an expensive code reader. That may be easier said than done, because it takes a lot of time to understand both the scan tool and how well it interacts with the vehicles you’re working on, but there are a few factors that can help you dive a little deeper into the functions at your fingertips.

2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

happy new year 2024
Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.

Tools in the Eye of the Beholder

We’re here to help you see all the tools, so you can invest wisely.

Multimeter Accuracy: How Important Is It?

Multimeter accuracy is critical for EV diagnostics.

multimeter

Other Posts

More Than A Scan Tool

Scan tools serve as indispensable diagnostic hubs, offering access to a wealth of resources, from OEM technical bulletins to community-documented repairs.

scan tool
Battling Stress and Burnout

Here are some quick tips for managing stress and avoiding burnout in the fast-paced automotive repair industry.

Nadine Battah
EV Acronyms and Terminology

Electric vehicles (EVs) are here to stay and there’s a lot to learn.

EV
The Value of Honesty in Auto Repairs

Discover how a simple act of returning found money led to a radio story, highlighting the significance of honesty.