Kia Tech Tip: DTC P0460 Update for Sephia Models

Kia Tech Tip: DTC P0460 Update for Sephia Models

The original logic used for DTC P0460 (fuel level sensor circuit malfunction) in 2000 model year Sephias would illuminate the MIL and store a fault code for circuit-related problems (open or short), and for a fuel level input signal that failed to stay within the "plausibility" test limits stored in the ECM. "Plausibility" or "rationality" checks are frequently built into the ECM software to make sure that test results outside the normal range are detected as possible faults.

In this case, that means that the ECM monitors fuel level increases (from refueling) and fuel level ­decreases (from running the vehicle). From these, it calculates the amount of fuel that has left the tank and compares it to the amount of fuel that was delivered (injected) to the engine. When this comparison results in too large of a difference, the ECM concludes that the fuel level input signal is “implausible” and therefore DTC P0460 is set, and the MIL will come on.

However, experience has shown that these “plausibility” tests could also cause DTC P0460 to set ­because of large fluctuations in fuel level input signal from fuel being drained or siphoned from the tank, or due to stopping or parking on a steep incline, etc. ­Because these conditions were never meant to set the code, a change in the ECM software has been made to prevent unjustified “MIL on” occurrences.

Starting with vehicles produced after October 13, 1999 (VIN KNAFB1217Y5857427), the logic has been changed so that “implausible” fuel level alone will no longer cause the MIL to come on.

Of course, a malfunctioning circuit will still set the DTC and illuminate the MIL.

Because of the way the software has been changed, occurrences of “implausible” fuel level indications may still be stored in the ECM. However, unless these are accompanied by an MIL (and as long as there are no problems reported with the fuel level indication or gauge), no further action will be required.

Courtesy of Kia Technician Times.

You May Also Like

Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah

Remember last month how I said 2024 was your year to be the technicians you always wanted to be? Remaining stagnant as a technician is simply not an option anymore if you want to be successful in the automotive industry. You must proactively seek out opportunities to embrace new tools, techniques and solutions that promise to enhance efficiency, accuracy and customer satisfaction.Embracing what’s new is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.One of the top reasons I can give you for embracing new technology is the potential for improved diagnostic accuracy and efficiency. With the arrival of advanced diagnostic tools, like the Bosch ADS 625X, the Autel IA900, or the Hunter ADASLink, technicians can pinpoint issues with precision, reducing guesswork and minimizing the risk of a comeback. Whether it’s sophisticated tools or cutting-edge software solutions, the ability to leverage these new tools should empower you to deliver next-level service and drive positive repair experiences for your customers.Another thing to keep in mind is that embracing new technology and equipment opens doors to expanded service offerings. From state-of-the-art lifts and alignment systems, to specialized tools designed for specific makes and models, investing in the latest equipment enables you and other technicians to tackle a larger range of repairs and maintenance with confidence and precision. As the technology in cars continue to evolve, so too must the tools and equipment that technicians rely on to get the job done.Embracing new technology and equipment can also lead to improved productivity in the shop. By leveraging high-quality products that are specifically designed for today’s vehicles, you can streamline workflow, minimize downtime and deliver exceptional results for your customers.At TechShop, we understand the importance of embracing new technology, equipment and products in the automotive repair industry. That’s why we’re excited to announce the debut of our all-new “Tool Time” video podcast series, where guests from brands like Ingersoll Rand, Clore Automotive, SATA Spray Equipment and many more will sit down and join Eric Garbe and myself to discuss education and training on the latest products our industry has to offer.Join us as we embrace the future of automotive tool supply and equipment advancements together. And, be sure to subscribe to the TechShop newsletter to stay tuned!

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Lisle 61860 Oil Filter Housing Torque Adapter – Mueller Kueps Presents Redesigned Sensor Tap Series – Lisle Low Profile Fuel Line Disconnect   OTC Genisys Touch – Quick scan, bidirectional control Snap-on VANTAGE Pro –

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool