Modern Balancers Offer Advanced Features

Modern Balancers Offer Advanced Features

Proper tire/wheel assembly balancing is important for vehicle safety. Balanced tires can mean the difference between a positive and negative driving experience. Especially in high-speed driving, improperly balanced tire/wheel assemblies can cause a vehicle to lose stability and operate in an unsafe — and uncomfortable — manner. Vibration, the most noticeable effect of imbalance, often first becomes apparent between 40 and 45 mph and increases with greater speeds. Drivers of high performance vehicles will be more sensitive to imbalance problems, but no driver is happy with an annoying vibration.

Static wheel balancing that uses a single weight plane and only addresses up-and-down imbalance is simply not adequate for today’s wheel vibration-sensitive vehicles. So, tire dealers and repair shops have installed spin-balancing machines to provide dynamic wheel balancing.

These machines measure two weight planes to eliminate side-to-side as well as up-and-down imbalance. The most sophisticated balancers now available can simulate a road test to identify and correct the lateral forces that lead to “tire pull.” This condition, created as the tire rolls along the road, makes a vehicle steer away from straight ahead. It is hard to detect during standard balancing or alignment service. Balancers equipped to measure these road forces cost more, but keep in mind when replacing tires, some imported luxury autos now require road force balancing to minimize vibration at high speeds.

When shopping for a balancer, consider the features that will help to minimize downtime, maximize technician productivity and deliver years of dependable service. Standard features on basic units include multiple static, dynamic and alloy wheel balancing modes, self-calibrating drive systems and centering check. Premium features can include color LCD displays with real-time 3-D animated graphics and ­visual cues, top and bottom dead-center lasers to automatically locate wheel weight position, VIN/TPMS scan and a printer for sharing information with customers. Higher-end models also can feature automatic wheel clamping, behind-the-spoke and patch-balance modes, a wheel lift, multiple operator pre-sets and tire inflation at the balancer. The most capable balancers can perform radial and lateral runout measurement, detect high spots and measure contact patch, and simulate a road test (wheel vibration and tire pull). Some manufacturers offer free printable posters, counter cards and consumer literature that can be used to promote premium balances and increase revenues.

An industry study shows that 60% of balancing problems could be attributed to improper wheel mounting on the balancer or clamping error. To ensure technicians are trained to use the balancer to its fullest capability, some units have self-training modes.

Accessories, including adapters for passenger cars to medium-duty trucks, are as critical as the balancer itself. A damaged or worn cone, spring or shaft can cause problems. Use the proper adapters and replace them diligently as they wear. This is especially important as more styles and types of wheels and tires enter the marketplace. If the tire-and-wheel assembly can’t be properly mounted to it, even the most advanced balancer won’t perform properly.

While automation is more costly, it increases accuracy, productivity and profitability. Helping to get balancing right the first time reduces costly comebacks, and the smooth ride that comes from proper tire and wheel balancing increases customer satisfaction. 

You May Also Like

Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah

Remember last month how I said 2024 was your year to be the technicians you always wanted to be? Remaining stagnant as a technician is simply not an option anymore if you want to be successful in the automotive industry. You must proactively seek out opportunities to embrace new tools, techniques and solutions that promise to enhance efficiency, accuracy and customer satisfaction.Embracing what’s new is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.One of the top reasons I can give you for embracing new technology is the potential for improved diagnostic accuracy and efficiency. With the arrival of advanced diagnostic tools, like the Bosch ADS 625X, the Autel IA900, or the Hunter ADASLink, technicians can pinpoint issues with precision, reducing guesswork and minimizing the risk of a comeback. Whether it’s sophisticated tools or cutting-edge software solutions, the ability to leverage these new tools should empower you to deliver next-level service and drive positive repair experiences for your customers.Another thing to keep in mind is that embracing new technology and equipment opens doors to expanded service offerings. From state-of-the-art lifts and alignment systems, to specialized tools designed for specific makes and models, investing in the latest equipment enables you and other technicians to tackle a larger range of repairs and maintenance with confidence and precision. As the technology in cars continue to evolve, so too must the tools and equipment that technicians rely on to get the job done.Embracing new technology and equipment can also lead to improved productivity in the shop. By leveraging high-quality products that are specifically designed for today’s vehicles, you can streamline workflow, minimize downtime and deliver exceptional results for your customers.At TechShop, we understand the importance of embracing new technology, equipment and products in the automotive repair industry. That’s why we’re excited to announce the debut of our all-new “Tool Time” video podcast series, where guests from brands like Ingersoll Rand, Clore Automotive, SATA Spray Equipment and many more will sit down and join Eric Garbe and myself to discuss education and training on the latest products our industry has to offer.Join us as we embrace the future of automotive tool supply and equipment advancements together. And, be sure to subscribe to the TechShop newsletter to stay tuned!

Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Lisle 61860 Oil Filter Housing Torque Adapter – Mueller Kueps Presents Redesigned Sensor Tap Series – Lisle Low Profile Fuel Line Disconnect   OTC Genisys Touch – Quick scan, bidirectional control Snap-on VANTAGE Pro –

Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

Other Posts

TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread
Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Scan Tool
2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

happy new year 2024
Impact Wrench Technology

Interchangeable anvils are a feature on some new impacts.