Tech Tip: MIL On/DTC P2004 on Miata and MazdaSpeed Models

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Techshop Magazine
The automotive industry’s knowledge base for equipment, tools and supplies
Features

Tech Tip: MIL On/DTC P2004 on Miata and MazdaSpeed Models

On some vehicles, after sitting overnight and being started, the MIL comes on and DTC P2004 sets into PCM memory. This occurs because vacuum (momentarily) does not flow into the Variable Tumble Control System (VTCS) shutter valve actuator.

TechShop Staff Writers
By TechShop Staff Writers
Published:

Applicable models: 2004-’05 Miata and MazdaSpeed MX-5.

Related Articles

On some vehicles, after sitting overnight and being started, the MIL comes on and DTC P2004 sets into PCM memory. This occurs because vacuum (momentarily) does not flow into the Variable Tumble Control System (VTCS) shutter valve actuator. The contact surface between the valve and the valve body inside the check valve is smooth, causing the valve to momentarily stick before more vacuum applies, opening the valve.

As a mass-production change, the contact surface between the valve and valve body has been made rougher to prevent the sticking condition. Customers having this concern should have their vehicle ­repaired using the following repair procedure.

Repair Procedure:Figure 1

1. Verify the customer’s concern.

2. Replace the check valve with a modified part (P/N BPYJ-13-995).
Note: The modified check valve can be identified by the yellow marking on the valve body. See Fig. 1.

3. Verify the repair.

Courtesy of ALLDATA.

You May Also Like

Red and Blue toy robots boxing
toolbox guide illustartion
Nadine Battah
Tire tread
From the Magazine

Maximize Your Scan Tool

Are you maximizing your scan tools to their full potential? Don’t let them be just an expensive code reader.

Eric Garbe
By Eric Garbe
Eric Garbe is a graduate of Columbus State Community College with a degree in Automotive Maintenance Technology. He has extensive independent and dealership field experience as a technician and shop owner and is an ASE Certified Master Technician and former Adjunct Automotive Professor. He has been professionally writing automotive technical articles and documents for many years and in his free time enjoys restoring old cars and creating custom interiors and upholstery.
Published:
Scan Tool

If there’s a truth that extends across all computerized devices, it’s that we likely utilize only a fraction of the things they have the ability to do. Mobile phones are a great example. How many people do you know who only use them for calls, voicemail and text messages? We all know they do so much more.The scan tools we use every day fall into the same category. Are you maximizing yours to their full potential? Don’t let them be just an expensive code reader. That may be easier said than done, because it takes a lot of time to understand both the scan tool and how well it interacts with the vehicles you’re working on, but there are a few factors that can help you dive a little deeper into the functions at your fingertips.

Read Full Article

More Features Posts
Brake Lathe Basics

Resurfacing drums and rotors is a machining process with its own specific guidelines.

By Eric Garbe
Refrigerant Oil Has to Be Right

Oil type is just as important as oil capacity.

By Eric Garbe
Three bottles of refrigerant oil
Top 5 Tools: Steve Coffell, Auto World, Hazelwood, MO

Steve Coffell, a technician at Auto World in Hazelwood, MO, says his Top 5 Favorite Tools are: Related Articles – Lisle Low Profile Fuel Line Disconnect – Dent Fix Soft-Shock Mallet DF-SM76 Reduces Damage – New ProMAXX Diesel Fuel Injector Seal Puller/Saver ProKits   OTC Genisys Touch – Quick scan, bidirectional control Snap-on VANTAGE Pro

By Jennifer Clements
Wheel Bearing Adjustment Tools & Equipment

A wheel bearing that’s out of adjustment can reduce bearing life and can affect more than just the bearing. It’s important to adjust the wheel bearing endplay to the proper specifications. If the bearing set is adjusted too loose or too tight, it can cause the bearing to fail prematurely. There are a few types of assemblies, so using correct procedures and tools will ensure a comeback-free wheel bearing installation.

By Andrew Markel

Other Posts

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

By TechShop Staff Writers
2024 Is Your Year to Be the Technician You Always Wanted to Be

As we enter 2024, strategic career planning is essential for success in the automotive repair industry.

By Nadine Battah
happy new year 2024
Software Focus: Efficient Diagnostics

Discover how to quickly retrieve codes, access exclusive repair information, and develop a strategic plan for optimal diagnostic results. This video is sponsored by Bosch.

By Nadine Battah
Why ECU Reflashing Needs Certain Power Levels

A reflash power supply is not designed to jumpstart the vehicle.

By Andrew Markel