Nissan Tech Tip: Engine will Not Crank with Outside Temperature Below 10 Degrees

Nissan Tech Tip: Engine will Not Crank with Outside Temperature Below 10 Degrees

This TSB applies to Altima, Maxima, Quest, Murano, 350Z, Titan, Armada, Pathfinder, Xterra and Frontier models.

Confirm a “no crank” (starter doesn’t work) incident under all of the following conditions:
1. The vehicle sat for several hours (cold soak) with outside temperatures below 10° F (12° C).
2. The vehicle was then driven for a short period of time (5-10 minutes).
3. The engine was then turned off for a short time (5-10 minutes).
4. The engine would then not crank when a restart was attempted (starter doesn’t work).

Note: This TSB applies only if all of the above conditions occurred.

Applied Vehicles:
• 2002-’06 Altima (L31);
• 2004-’06 Maxima (A34);
• 2004-’06 Quest (V42);
• 2003-’06 Murano (Z50);
• 2003-’06 350Z (Z33);
• 2004-’06 Titan (A60);
• 2004-’06 Armada (TA60);
• 2005-’06 Pathfinder (R51);
• 2005-’06 Xterra (N50); and
• 2005-’06 Frontier (D40).

Action:
Replace the Intelligent Power Distribution Module-IPDM (see chart). For IPDM replacement information, go to the Service Manual, section PG, Removal and Installation of IPDM E/R.

Technical service bulletin courtesy of Mitchell 1.

For more information on Mitchell 1 products and services, automotive professionals can log onto the company’s website at www.mitchell1.com.

You May Also Like

TEXA Releases IDC5 CAR 76.5.0 Update

IDC5 CAR 76.5.0 is characterized by over 2600 new possible selections for the major makes on the market worldwide.

TEXA has released a major update IDC5 CAR 76.5.0 which enhances Car, Supercar and Light Commercial IDC5 diagnostic features & coverage. This latest software update enables more efficient troubleshooting, enhances existing special functions and topology module mapping features, while increasing technical information accessibility that is essential for accurately completing complex workshop operations. IDC5 CAR 76.5.0 includes the update of 37 makes, including electric and hybrid vehicles, while increasing the coverage of ADAS calibration, enhancing the visual live data "DASHBOARD" screens and other interactive technical information features like wiring diagrams, maintenance guides and component location diagrams.

TechShop, ShopOwner Offer $50 For Good Guesses

Guess the Tool for a chance at cold hard cash!

TS Toolbox Guide February 2024

Here’s a look at some of the core feature and modern frills to consider when it’s time to move into a new office.

toolbox guide illustartion
Embracing Cutting-Edge Solutions the Industry has to Offer

Embracing cutting-edge solutions is strategic and imperative for technicians navigating the constantly changing landscape of automotive maintenance and repair.

Nadine Battah
TPMS: Are Retrofits in Your Future?

Installing a retrofit kit can be performed with the tools and equipment you already own and use on a daily basis.

Tire tread

Other Posts

New Snap-on Limited Edition Speed Demon Roll Cab

Features include next-level organization, durability, security, mobility and exclusive Speed Demon emblem.

ISN Expands Freedom Program for Mobile Tool Dealers

ISN’s Freedom Program is designed to provide experienced, successful mobile tool dealers with support to become an independent mobile dealer and expand their growth.

Snap-on Continues to Offer Free Weekly Product Training Sessions

The online training and question and answer sessions are free of charge.

Repairify Announces Executive Leadership Changes

The company has named Craig Edmonds as president of asTech among other executive appointments.